Breg Vectra Premium Walker Boot Liner Kit

Breg Vectra Premium Walker Boot Liner Kit Features

• Kit includes:
  - Liner
  - Calf and foot straps
  - Two foam ankle pad
• Common Examples of Use:
- Soft tissue injuries of the lower leg
- Moderate to severe ankle sprains
- Syndesmosis (high ankle) sprain
- Forefoot/midfoot/hindfoot pain and injuries
- Stable foot and/or ankle fractures
- Post ORIF and surgical stabilization after tendon/ligament repairs
- Metatarsal fracture
- Other acute or post-operative use (i.e. bunionectomy)

• Instruction Manual

More On Breg Vectra Premium Walker Boot

• Fitting Instructions:
  - Apply liner to leg 
With patient seated, leg(s) bent and feet off floor, position tongue pad as needed for maximum comfort, close liner snugly
- Slide walker onto leg over the liner straight up directly under foot
- Fasten straps
Start with straps 1 and 2 closest to the toes (Straps may be trimmed to desired length)
- Position walker with uprights centered over the malleoli (ankle bones)
Ensure heel is positioned at the rear of the Walker
- Remove quick-pulls from the uprights and discard
Attach uprights to the liner
Press firmly
- Fasten straps
Affix straps 3 through 5 to the outside of the uprights by alternating the buckle placement
Then fasten straps 3 through 5

• Use and care:
- After initial application, the Vectra may be removed and reapplied without removing liner from boot- Hand wash the liner and straps with mild soap, air dry
- Do not place liner or straps into a mechanical dryer