Breg Control Range of Motion Walking Boot

Breg Control Range of Motion Walking Boot Features

• Range of motion control from 0-30° for both dorsiflexion and plantarflexion
• Easily adjusts in 10° range of motion increments
• Cushioned insole and heel for maximum comfort
• Straps can be individually adjusted and placed on the uprights for support
• Malleable aluminum uprights ensure a customized fit
• Rocker bottom sole for ease of ambulation
• Common Examples of Use:
  - Acute trauma or post-operative use
  - Post ORIF and surgical stabilization after tendon/ligament repairs (i.e. Achilles tendon)
  - Moderate to severe ankle sprains
  - Stable foot and/or ankle fractures
• Instruction Manual

More on Breg Control Range of Motion Walking Boot

Instructions:

• Pads may be inserted to accommodate extra space on either side of the ankle or at the heel. The larger tongue pad should be positioned over the top of the foot.
• Place foot and leg inside liner with heel firmly against the back. Close liner tightly, left to right, securing the velcro closures.
• Position heel of the foot against the rocker boot. Brace uprights should be positioned mid-line over the ankle. Press the uprights firmly against the liner.
  NOTE: Uprights may be contoured to the individual patient if required. Use table edge for bending.
• Optional A-P inserts provide additional support when indicated. Apply the anterior and posterior inserts no less than 1" above the ankle joint to avoid pressure from the distal edges when walking.
  NOTE: If needed, contour A-P inserts with the heat gun, trim with heavy scissors.
• Tighten foot straps. Apply top three straps, alternate their direction, and tighten.
• After properly applying the Controlled Range of Motion Walker, determine the required angle of dorsiflexion and plantar flexion. Use an Allen wrench to adjust the limit screws. 
• NOTE: See hinge adjustment instructions on opposite side.