Bard Bardia 2-Way Silicone-Elastomer Coated Foley Catheter With 5cc Balloon Capacity

How to Inflate and Deflate Foley Catheters?

Catheter Inflation Instructions:

• Ensure that the Bardia 2-way silicone-elastomer coated Foley catheter balloon is positioned well within the bladder of the patient.
• Slowly, with a gentle, constant force, inflate the catheter balloon with the volume prescribed on the package.
• Note that the 5cc balloon must be inflated with 10cc of sterile water.
• Improperly inflated Bard Foley catheter balloons may cause drainage and deflation difficulties.
• Using fluid other than sterile water may cause the balloon not to empty properly, especially after long dwell times.



Properly Inflated	Under Inflated

Catheter Deflation Instructions:

• Select a luer lock or slip tip syringe.
• Slide the plunger of the syringe up and down the barrel of the syringe several times to "loosen it up".
• Compress the plunger all the way and then pull back the plunger slightly so that it does not adhere to the front of the syringe barrel.
• Gently insert the syringe into the catheter valve.
• Do not use more force than is required to make the syringe "stick" in the valve.
• Allow the pressure within the balloon to force the plunger back and fill the syringe with water.
• If you notice slow or no deflation, re-seat the syringe gently. Once again, allow the balloon to deflate slowly on its own.
• If the balloon does not deflate, reposition the patient.
• Ensure that the Bardia 2-way silicone-elastomer coated Foley catheter is not in traction—the proximal end of the catheter is not compressed within the bladder neck.
• Ensure that urine flows freely.
• Attempt to deflate the balloon by using the pressure in the balloon to force water into the syringe as described above.
• If the balloon still fails to deflate, apply very gentle slow aspiration. The aspiration that is too rapid, or too forceful, may cause the inflation lumen within the Foley catheter to collapse.
• If permitted by hospital protocol, the valve arm may be severed.
• If this fails, contact an adequately trained professional for assistance, as directed by hospital protocol.

• Do not use ointments or lubricants having a petrolatum base. They will damage the catheter.
• Visually inspect the product for any imperfections or surface deterioration prior to use.
• Inflate the balloon with sterile water to the volume stated on the inflation lumen of the catheter by using a water-filled Luer tip syringe.
• Do not use needle.
• Do not exceed recommended capacities.

Bardia Foley Catheter Specifications

Customer Reviews

Questions & Answers

Ask a Question

Enter your question below:

 

Security question 8+ 6 =   SubmitCancel

Enter your Answer below.

Security Question:8 + 6 =

	ItemQuestion ItemName - now
	Your question will show here once it will get approved.

	UserAnswer UserName - now Your Answer will show here once it will get approved.

how does silicone elastomer helps in catheterization Brenda - 10/28/2015 4:02:36 AM

ReplyShare

	Silicone Elastomer—Hydrophobic material that rejects moisture.  • Protects from irritation  • Smooth surface  • Permanent coating Hope that helps. Customer Service - 10/28/2015 4:03:28 AM