3M Medipore +Pad Soft Cloth Adhesive Wound Dressing

How To Use Medipore Plus Pad Dressing?

• Prepare the site for catheter insertion or wound dressing in accordance with standard hospital protocol
• Clipping off excess hair at the site may be necessary to ensure best Medipore dressing adhesion
• Shaving is not recommended
• Allow all prep liquids to dry completely before dressing application

1. Open package and remove 3M Medipore +Pad Soft Cloth Adhesive Wound Dressing.
2. Peel the paper liner from the dressing, exposing the adhesive surface.
3. Position the dressing over the wound site or the catheter insertion site and apply dressing.
4. Smooth down the dressing edges. Seal securely around catheter or wound site. Firmly smooth adhesive border to the skin.
5. When exudate penetrate through the soft cloth backing, change the dressing.
6. To remove 3M Medipore Pad, gently grasp the edge and slowly peel the dressing from the skin in the direction of hair growth.

• Medipore +Pad adhesive wound dressing should not be used to replace sutures or other primary wound closure methods.
• The dressing should be changed if not intact. An intact dressing is one that has been properly applied to achieve and maintain good adhesion, at least around the total periphery of the dressing. To attain the best results, choose the Medipore dressing size such that it has a margin which adheres to dry, healthy skin around the wound site.
• The site should be observed frequently for signs of infection. Infection may be signaled by pain, fever, swelling, redness, or an unusual odor or discharge. In such case remove the dressing and take standard precautions.

• Before applying the dressing, hemostasis of the catheter site or wound should be achieved
• The skin should be dry and free of detergent residue to ensure good adhesion
• If tension is applied, it may result in skin trauma

• Store 3M Medipore +Pad Soft Cloth Adhesive Wound Dressing in normal room temperature, 59 86 degrees F (15 30 degrees C)
• For shelf life, refer to the expiration date which is printed on each package

Medipore +Pad Specifications

Customer Reviews

Questions & Answers

Ask a Question

Enter your question below:

 

Security question 8+ 3 =   SubmitCancel

Enter your Answer below.

Security Question:8 + 3 =

	ItemQuestion ItemName - now
	Your question will show here once it will get approved.

	UserAnswer UserName - now Your Answer will show here once it will get approved.

When is a dressing change required? Ichan - 3/29/2017 6:39:49 AM

ReplyShare

	3M Medipore +Pad Soft Cloth Adhesive Wound Dressing should be changed when exudate penetrates through the soft cloth backing. Customer Care - 9/8/2017 1:43:28 AM

Is the absorbent pad of this dressing same as the 3M Microdon Sheeting material? Moshin - 3/29/2017 6:39:15 AM

ReplyShare

	Yes, absorbent pad of 3M Medipore +Pad Dressing is the same, but the island dressing pad is slightly thicker to provide better absorbency. Customer Care - 9/8/2017 1:45:11 AM

How often do you change? Alecia - 6/25/2016 2:05:31 PM

ReplyShare

	3M Medipore +Pad Soft Cloth Adhesive Wound Dressing can stay in place for up to 48 hours. Customer Care - 9/8/2017 1:46:50 AM