Teakworks4u Wall Mount Fold Down Teak Shower Bench

Teakworks4u Wall Mount Fold Down Teak Shower Bench Teakworks4u Wall Mount Fold Down Teak Shower Bench 17 inches Teakworks4u Wall Mount Fold Down Teak Shower Bench

Shipping Charges Applicable

Shipping Charges Applicable

Options

Item# Description Pkg availability reward$ Price Blank
Item #: TBF-17W
17"L x 12.5"D, Burmese Teak
Each
Each In stock
reward$
$9.60
$447.99
$319.99
Item #: TBF-24W
24"L x 12.5"D, Burmese Teak
Each
Each In stock
reward$
$10.65
$496.99
$354.99
Item #: TBF-30W
30"L x 12.5"D, Burmese Teak
Each
Each In stock
reward$
$11.40
$531.99
$379.99
Item #: PTBF-17W
17"L x 12.5"D, Plantation Teak
Each
Each In stock
reward$
$10.18
$441.29
$339.39
Item #: PTBF-24W
24"L x 12.5"D, Plantation Teak
Each
Each In stock
reward$
$11.50
$498.49
$383.39
Item #: PTBF-30W
30"L x 12.5"D, Plantation Teak
Each
Each In stock
reward$
$12.91
$559.69
$430.49

Teakworks4u Wall Mount Fold Down Teak Shower Bench can be mount directly to the wall, either inside or outside of the shower. 304 stainless steel mounting brackets lock securely when the seat is lifted and folds down easily when not in use. Low-pressure spring action of Teak Shower Bench makes it easy to raise and lower the seat. It is perfect for the shower, steam room or sauna, and is naturally mold and mildew resistant due to the antimicrobial properties of wood.

Why choose Teak Shower Seat?

  • Mounts directly to the shower wall
  • Brackets are set 16" on center
  • Seat remains in raised position until you fold it down
  • Rounded edges on seat battens for comfort and safety
  • Handcrafted in the USA
  • Weight capacity: 300lbs

Foldable Teak Shower Bench Features

Key Features:
  • Each bench uses Marine Grade Stainless Steel Screws to prevent staining and rusting
  • 304 Stainless Steel wall brackets lock securely into place when the seat is lifted, yet folds down easily when not in use
  • Joining surfaces are glued with Titebond high-quality waterproof glue and all screws are countersunk
  • Low pressure spring action makes it easy to raise and lower the seat Suggested mounting height 17 inches to 19 inches
  • Sturdy construction Shower Bench

Teakwood4u Wood options

  • Burmese Teak: Premium Teak which is pure heartwood from mature Teak trees grown in the Indonesia/South East Asia region. Heartwood Teak gives an elegant piece with unique grain pattern and a beautiful rich color giving any area an immediate WOW factor. High silica content in teak makes it an ideal wood to use when a slip resistant surface is required and the natural oil present makes the wood resistant to mold and mildew.
  • Plantation Teak: FSC certified Plantation Teak comes from the trees harvested from an actual plantation of younger Teak trees. Since only the heartwood of the tree is used, it has all the same qualities of old growth Burmese Teak but is a little lighter in color and requires a little more maintenance. Products from teak are harvested under strict social, economic and environmental standards.

Benefits of Teak Wood

  • The FSC certified Teak wood is harvested from Indonesia and South Eastern Asia. The wood comes from the heartwood of a tree, the inner part, which makes the wood harder and presents a unique and beautiful grain pattern.
  • Teak trees are grown in sandy soil and take in silica through their roots. This combined with naturally occurring oils make teak wood slip-resistant and water, mildew, and mold resistant. This makes a perfect wood choice for shower seats that sit in a moist and wet atmosphere.

Teak Wood Maintenance

  • Teak wood requires little maintenance due to its naturally occurring shine and water resistance. Use in showers and other environments, though, can cause soap build-up. When this happens, simply use a soft bristle brush and soap mixture to clean. Rinse and allow to air dry to restore the beautiful shine.
  • Teakwood Maintaining Kit Sold Separately
    - Teakworks4u Deluxe Teak Cleaning Kit

What to buy with Wall Mounted Folding Teak Shower Bench


How to Mount Teakworks4u Fold Down Teak Shower Bench

  1. Select the location for mounting the bench. Keep in mind that Teakworks4u Wall Mount Bench is collapsible so be sure that there is enough clearance for proper operation of the adjustment mechanism.
  2. Locate the wall studs. Depending on the type of stud sensor you have, you can also use it to locate any electrical wires or other obstructions on the wall. If you find electrical wires, water pipes or any other obstructions, it is best to choose a different location for your bench.
  3. Measure up from the floor to the desired height of the bench. We recommend a minimum of 13" to a maximum of 18" but you can vary this according to your specific requirements. Make a mark on the wall for the height. Using your level, mark a level horizontal line to reference as you continue.
  4. For easier mounting, the brackets on your bench are located at 16" on center, the same as most wall studs. Using the template at left, mark the locations of the mounting holes for each bracket. You can also have someone hold the bench in position while you mark the holes directly from the bracket.
  5. Using a drill and a 5/32" bit, drill pilot holes in the wall being sure to stay centered on the stud. Be sure to check that all of the pilot holes line up with the bracket before proceeding. Make any necessary adjustments.
  6. Again, have someone hold the shelf in place while you set the screws in place. Double-check the level of the bench. This is your last chance to make any minor adjustments. Once you are satisfied with the level, using your power drill, drive the screws firmly against the wall brackets. Do not over-tighten as this can compromise the strength of the bracket. Hand test all of the screws to be sure that they are solidly set in place.
  7. Test the locking mechanism of the mounted bench, ensuring that the bench can be raised and lowered easily.
  8. Load test the bench to confirm secure mounting.

How to Measure for a Custom Bench?

  1. Length x Depth x Height = Bench Size
  2. Bench height can vary, but typically 17" to 19" is pretty standard

Warnings:
  • You must mount your bench directly into the center of the wooden studs of wall.
  • Do not attempt to mount into steel studs or with any type of wall anchor. This will not provide adequate support.
  • Be sure to include the thickness of the bench in your measurement calculations.

Teakwood4u Manuals


Teak Shower Bench Specificatons

CodeTeakLengthWidthHeightOverall Height
TBF-17WBurmese17"12.5"2"2"
TBF-24WBurmese24"12.5"2"2"
TBF-30WBurmese30"12.5"2"2"
PTBF-17WPlantation17"12.5"2"2"
PTBF-24WPlantation24"12.5"2"2"
PTBF-30WPlantation30"12.5"2"2"

Teakworks4u Wall Mount Shower Bench Reviews

{{x.Heading}}

{{x.ShortDescription}} ...

Share

Please enter your and your friends email address below.

Fields marked with * are compulsory

Your Name*
Your Email Address
Friend's Name*
Friend's Email Address
Message
The selected product information along with Reward Dollar coupon code has been successfully emailed to you and your friend.

Thank you for using www.healthproductsforyou.com

Close