Get 10% Off*, Use Code: HPFYP10

Online since 2002 |   866-316-0162

View product option

Roll-A-Ramp 30-Inch Modular Ramp

Authorized Retailer
  • Product Option
Request quote

Roll-A-Ramp 30-Inch Modular Ramp is an excellent alternative to building a permanent wooden ramp and a good option for wheelchairs, walkers, scooters, or any accessibility need. Roll-A-Ramp gives you the versatility of having a portable system at any length. Using platforms (small landings) you can create a ramp that has a 90 degree angle turn. Its unique roll-and-go design makes it the ideal choice when convenience, storage, and transportability are key concerns.


Total: $814.00

Earn $24.42 in HPFY rewards

For Assistance 877-278-6039

Roll-A-Ramp Modular Ramp Features

  • Includes
    - One long ramp or multiple shorter ramps
    - Adjustable Support Stands
    - Quick Release Pins (6 ft. and longer)
    - Support Stands for ramps 11′ and longer (placed at 6′-7′ increments)
  • Features
    - Easy set up and take down – or leave in place
    - Rolls up and is always portable
    - Lightweight yet extremely sturdy and durable
    - Can be configured as multiple ramps in one
    - 10-year unlimited warranty on ramp

How to use Roll-A-Ramp Aluminum Modular Ramp?

  1. Place at least the first two sections of Roll-A-Ramp on the top step and it is ready for use.
  2. Roll-A-Ramp''s unique design makes it ideal for threshold, without the need for any added accessories.
  3. Roll-A-Ramp can easily be used to bridge gaps.
  4. With our Seg-mount, Roll-A-Ramp can be placed flush with the top step so you can close a door with the ramp in place.

Splitting/Joining Ramp Sections with Optional Quick Release Pins

  1. Align the two sections in the same way as the rest of the ramp so the holes are aligned.
  2. Insert the quick release pin into the hole in the section, ensuring the pin goes through both ramp sections.
  3. Insert the cotter pin attached to the end of the wire, push through the hole in the end of the quick release pin, until it fits securely around the body of the quick release pin

Adding or Removing Ramp Sections

Use the 3/16” Hex Allen Wrench and a 1/2” wrench or the wrench provided.Align ramp sections - insert bolt through hole - tighten with Allen Wrench and wrench provided or a 1/2” socket.
Note: Do NOT fully tighten nut to be able to roll up.

How Long Of A Ramp Should User Buy?

Generally Recommended Slope Angles

  • 4.8-degree - This is Americans With Disabilities Act compliant 
  • 7-degree - Manual wheelchair users who are independent or who have an attendant with limited strength 
  • 10-degree - Manual wheelchairs with a reasonably strong attendant 
  • 12-degree - Power wheelchairs or scooters and manual chairs with a strong attendant 
  • 15-degree - Restricted space, unoccupied loading/unloading

Determining Ramp Length
Measure total rise (how many inches from lower level to upper level) and divide by the slope.

  • 4.8-degree - Rise distance divided by 1 
  • 7-degree - Rise distance divided by 1.5 
  • 10-degree - Rise distance divided by 2 
  • 12-degree - Rise distance divided by 2.4 
  • 15-degree - Rise distance divided by 3 
  • Example - For a desired slope of 7 degrees with a rise of 12″ (1 foot), 12/1.5 = 8 foot ramp

Common Applications
Roll-A-Ramp 30-Inch Aluminum Modular Ramp is commonly used in following places

  • Homes / Apartments
  • Vans 
  • Trucks 
  • Boats 
  • Airplanes 
  • Churches
  • Schools 
  • Restaurants 
  • Hotels 
  • Appointments 
  • Temporary ramp

Product Videos

Related Articles


{{x.ShortDescription}} ...


Customer Reviews

Please enter your and your friends email address below.

Fields marked with * are compulsory

Your Name*
Your Email Address
Friend's Name*
Friend's Email Address
The selected product information along with Reward Dollar coupon code has been successfully emailed to you and your friend.

Thank you for using