Get 10% OFF*, Use Code: HPDIS10
Some text in the Modal......
Proactive Premium Rechargeable Handheld Pulse Oximeter measures blood oxygen concentration and pulse rate. Its lightweight, contoured form fits comfortably in your hand, making it easy to use. The pulse oximeter is rechargeable, with a built-in battery for convenience, and can be used with patients of any age.
1. With the upper and lower jaws open, place an index finger evenly on the base of the clip. Push the finger tip against the stop so that it is over the sensor window (A). If an index finger cannot be positioned correctly, or is not available, other fingers can be used. Note: When selecting a sensor site, priority should be given to an extremity free of an arterial catheter, blood pressure cuff, or intravascular infusion line
2. Spread open the rear tabs of the sensor to provide even force over the length of the pads (B)
3. The sensor should be oriented in such a way that the cable is positioned along the top of the hand (C)
4. Plug the sensor into the oximeter and verify proper operation as described in the oximeter operator’s manual
5. Inspect the monitoring site every 4 hours for skin integrity
6. After use, surface-clean sensor and cable with a soft gauze pad by saturating it with a solution such as 70% isopropyl alcohol. If low-level disinfection is required, use a 1:10 bleach solution
1 Year limited warranty
{{x.VideoName}}
{{x.ShortDescription}} ...
{{x.Name}}
Please enter your and your friends email address below.
Fields marked with * are compulsory
