Posey Foam Trach Ties

More On Posey Foam Trach Ties

1. Thread the hook end of the tie through one slot of the tracheostomy tube and attach the hook fastener to the fuzzy side of the neck pad or strap. Make sure entire fastener is attached as shown in Fig. 2. Slot should be at least 3/8" wide to allow for easy insertion (Fig. 1).




2. Bring the foam neck collar behind the patient neck and thread the other hook end through the other slot in the tracheostomy tube.
3. Adjust to fit. A proper fit is achieved when the entire tie rests smoothly on the neck with no slack. Do not attach too tightly. Foam should not be compressed when applied.
4. Secure "hook" fastener to fuzzy side of neck strap or neck collar (Fig. 2). Make sure entire fastener is attached on both sides.
5. If desired, the neck strap may be knotted to shorten.

1. Position the oxygen cannula as shown in Fig. 3 or Fig. 4.
2. Secure one side of the tie to the oxygen cannula. Make sure entire fastener is attached as shown in Fig. 3 or Fig. 4.




3. Bring the foam neck collar behind the patient neck or over the patient head. Secure the other side of the tie to the other side of the oxygen cannula, taking care not to displace the oxygen cannula.
4. Adjust to fit. A proper fit is achieved when the entire tie rests smoothly on the neck or head with no slack. Do not attach too tightly. Foam should not be compressed when applied.
5. Secure hook fastener to fuzzy side of the tie. Make sure entire fastener is attached on both sides.
6. If desired, the neck strap may be knotted to shorten.

• This device is designed for use in normal indoor environments.
• This device may be stored in ambient warehouse temperatures at normal humidity levels.
• Avoid excess moisture or high humidity that may damage product materials.

Specification

Customer Reviews