Ossur Innovator Cool Post-Op Knee Brace

Knee Brace Features

• Locks quickly at 0°, 10°, 20°, 30°, 45°, 60°, 75°, and 90°
• Low-profile hinge, no exposed metal edges to scrape, catch or snag
• Durable, lightweight ergonomic design
• Easy to see range of motion stops
• Extension control from 10° to 90° (10° incremental)
• Flexion control from 0° to 120° (10° incremental)
• Indications:
• - Post-op/post-injury ROM control or immobilisation
  - Cool model allows airflow and suits warmer climates
  - Full foam allows wrap-around support

More Information

• Apply the Foam Wraps:
  - Remove foam cuffs from hinge assemblies
  - Apply calf and thigh foam cuffs snugly around the leg closing on front of the leg
• Align and Apply Hinges:
  - Position and press the lateral side bar assembly onto the cuffs along the midline of the leg centering the hinge pivot axes slightly above the knee joint line
  - Repeat for the medial side bar assembly, ensuring that the hinge pivot axis align vertically
  - Reposition the foam cuffs as needed, ensuring that the patella remains exposed
• Secure the Leg Straps:
  - Secure and fasten all straps, starting with the straps closest to the knee first
• Brace Application and Removal:
  Properly applied brace will have:
  - Foam wraps secured at the front of the leg
  - Hinges will be aligned vertically with each other at the midline of the leg, and pivot just above the knee axis
  - All straps will be secured at the front of the leg
• Removal and Re-Application:
  - To remove the brace, unfasten the straps and open the foam pads
  - The brace can then be removed and reapplied as a single unit
• Hinge Operation and Adjustment:
  - To adjust the hinge, press the flexion or extension button and rotate until the desired degree of flexion or extension shows through the corresponding window and release button
  - The 0-lock settings are used to lock the brace in full extension
• Enforced Compliance:
  - Loop the enclosed lock ties through the hole in the flexion and extension buttons tolimit range of motion
• Side Bar Adjustment:
  - To breakdown the side bars, place the hinge on a hard flat surface with the scored line just off the edge and firmly press down to snap off
  - Side bars can be bent to fit individual legs
• Use and Care:
  - Read all instructions completely before use
  - All foam pads may be trimmed as necessary
  - Hand wash foam liners with mild soap
  - Air dry only
  - Do not heat dry
  Note: Always consult your physician or therapist before making any adjustments to the brace
• Cautions and Warnings:
  - Carefully read use instructions and warnings prior to operation
  - Federal law restricts this device to sale by or on the order of a licensed health care practitioner
  - For single patient use only
  - If you experience increased pain, swelling, sensation changes or any adverse reactions while using this product, immediately consult your medical professional - This device will not prevent or reduce all injuries. Proper rehabilitation and activity modification are also essential parts of a safe treatment program