Medela Invia Motion NPWT Canister and Tubing Set with Solidifier and Quick Connector

Invia Motion NPWT Canister and Tubing Set Features

• Graduated
• Not autoclavable
• Without lid
• Sterile
• Latex-free
• Disposable

What to buy with Medela Invia Motion NPWT Tubing and Canister Set

• Medela Invia NPWT Foam Dressing Kit with FitPad
• Allerderm Cotton Glove Liner
• Anacapa Anasept Antimicrobial Skin And Wound Cleanser

How to change Invia Motion NPWT Canister and Tubing Set?

To be used by healthcare professionals or adequately trained caregivers only. Change the canister minimum once a week or when it appears full, when the canister full signal sounds or when the canister full symbol is displayed.

1. Wash hands and prepare clean paper towel
2. Remove the Invia Motion NPWT pump from the carrying case. Switch the Invia Motion NPWT pump off by pressing the button and holding for 3 seconds. Press only once.
3. Position the clamp next to the quick-connector and close the EN clamp on the pump tubing and close the clamp on the dressing tubing
4. Disconnect the Invia Motion NPWT pump tubing from the dressing tubing by pressing on the sides of the quick-connector. Have a paper towel or tissue available to cover the tip of the used tubing to protect against wound fluid leakage.
5. Detach the full canister/tubing set by rotating the canister to the left
6. Wash hands
7. Obtain a new Invia Motion canister/tubing set and open the packaging.
   Caution - Do not use an Invia Motion canister/tubing set if the sterile packaging is damaged or has expired.
8. Remove the new canister/tubing set from the packaging and attach it to the Invia Motion NPWT pump by pressing the canister to the Invia Motion NPWT pump and rotating to the right. Make sure the canister is aligned with the label to the front.
9. Connect the Invia Motion tubing connector to the wound drain tubing. Push together until you hear a click.
10. Open the clamp on the dressing tubing. Also make sure the clamp on the pump tubing is open.
11. Switch the Invia Motion NPWT pump on by pressing the button. Slide the Invia Motion NPWT pump into the carrying case.
12. Discard the used canister/tubing set according to instructions provided by your healthcare professional.