Jodi-Vac Pro Plus Hearing Aids Vacuum System

Features

• Jodi Vac Pro Plus Hearing Aids Vacuum System includes:
  - (1) Pink ITE, ITC, CIC, RIC needle
  - (1) Black BTE ear mold needle
  - (1) Light Blue open ear thin tube needle
  - (2) Steel reamers
• Light-weight, portable hearing aid vacuum cleaner for the professional
• Well suited for the office or back room lab that utilizes ammonia for the most thorough cleaning of transducers
• Features vacuum on/off switch, removable vacuum tube, inserts for needles and filtered liquid trap
• Box size: 6.5" X 4.5" x 2.5" tall
• Pump:
  - Vacuum is 22.5" of Mercury
  - Pump is serviceable and motor is rated at 2000 hours
• Electrical:
  - Internals operate on 12VDC and power supply is universal 100-260Vac, 50/60Hz
  - Ac cords are interchangeable for international use
• Vacuum:
  - ISO LuerLoc Clear assembly is easy to clean and is replaceable
  - Intended for use with liquids, Wax/Debris collects in liquid filter assembly
  - 3 needles are provided, covering the highly efficient cleaning of CICs, ITCs, ITEs, RICs, open ear thin tubes and ear molds
  - Needles are cleaned with a needle reamer
  - Blue coiled tube extends to a full length of 35"
• Note:
  - Home use of this product should get 12 months service
  - Household consumer will get only one type of needle which is PINK ITE, ITC, CIC, RIC needle while professional consumers would get all three needles

More Information

• Normal Operation:
  - Turn on switch 1, work needle up and down the sides of the sound bore, going till you bottom out .If this was not satisfactory, use Ammonia to break down ear wax/oil and then vacuum, repeating as necessary. This unit is meant to be compatible with liquids if you should opt to use them. The clear tube is easily removed for cleaning, disinfecting or sterilizing. When the needle gets clogged you will hear a tonal change in the vacuum pump, the same noise can be simulated by positioning your finger on and off the needle end.
  - Take a second and read the Hearing Aid Tech.
  - Our pink needle is specifically designed for maximum vacuum efficiency in CICs, ITC, ITE, and RIC sound bores.
  - The Light Blue needle is sized for open ear Thin Tubes.
  - Our Black needle is oversized for Ear Molds. Changing this needle to another size will decrease vacuuming efficiency in the sound bore and the receiver nubbin.
• Cleaning:
  - Use a lint free cloth with alcohol or ammonia and wipe all parts of this unit
• Important safeguards: To reduce the risk of electric shock:
  - Always unplug this product immediately after using
  - Do not use while bathing
  - Do not place or store product where it can fall or be pulled into a tub or sink
  - Do not place in or drop into water or other liquid