Get 15% Off*, Use Code: HPCW15

Day
:
:
Online since 2002 |   +1 866-316-0162

View product option

Jamar Smart Digital Hand Dynamometer

Authorized Retailer BadgeAuthorized Retailer
Product Option

Hand Dynamometer

SKU 81669928
$439.17 Each
Request quote

Jamar Smart Digital Hand Dynamometer works to provide enhanced medical screenings that are easy for doctors and patients. It runs on AAA batteries and has a 10 minute automatic shut off for energy efficiency. It is the best handgrip dynamometer for grip strength measurement. The dynamometer has clear audible signals for aid in testing, calculates the Average, Standard Deviation, and Coefficient of Variation, and clearly displays results in pounds or kilograms.

Benefits of Jamar Digital Hand Dynamometer

  • Best Hand Grip Dynamometer for Grip Strength Measurement
  • Provide enhanced medical screenings.
  • Easy to Use for Testing
  • Can be used for all your grip tests

$608.59

Total: $439.17

Earn $13.18 in HPFY rewards

Jamar Smart Digital Hand Dynamometer Features

  • Digital hand dynamometer used to assess hand grip and strength in order to monitor progress during rehabilitation or detect hand injury or defect
  • Jamar Smart works with mobile Jamar Smart app to display immediate results that can quickly be read, edited, and saved using the tablet
  • Durable body is made with aluminum and scratch resistant UV coating
  • Circuit board and electronic load sensors gives the Jamar Smart Digital Hand Dynamometers more accurate readings than comparable hand dynamometers made with hydraulic systems
  • The LCD display reads grip force ranging from 0-200 lbs (0-90 kg)
  • Used to measure the patient’s grip strength and track their progress during therapy.
  • For protection and travel, the Hand Dynamometers come in a reusable storage case
  • It has two available apps for the tablet. A free version features tools that allow for easy reading of standard handgrip features. Or use the fully featured app that provides additional tools for more in-depth analysis. Record, graph, and track changes in handgrip strength and save patient results.

What to buy with Jamar Grip Dynamometer?


How to use Smart Digital Hand Dynamometer for Testing?

  1. Press the [ON/OFF] key to start the instrument
  2. Determine which hand will be used. Using the [SELECT TEST] key, scroll to the “L” (Left) or “R” (Right) icon to select the hand to be tested.
  3. To alternate left and right hand tests (i.e., L1 - R1, L2 - R2, L3 - R3, etc.) press [SELECT TEST] until both the “L” and “R” are displayed. The instrument will automatically alternate “L” and “R” hand test cycles.
  4. To select the number of test repetitions (up to 5) to be recorded for that hand, press the [# OF TRIALS] key. Each of the five numbers (1 through 5) will be displayed on the upper line of the display. Stop scrolling on the number which represents the number of tests to be taken.
  5. Have the patient grasp the Jamar Smart Hand Dynamometer gently so that the palm fits comfortably to the rear of the instrument and the fingers curls around the adjustable grip at the front of the instrument.
  6. Press the [TEST] key to begin the test. Under the present test protocol, start with the first test trial and the number “1” will appear and flash at the top of the display, indicating that the first test for the chosen hand is ready. Have the patient squeeze the grip and be ready to enter the second trial (if test protocol setting has more than 1 trial).
  7. When the first test is completed, press the [TEST] key one time to scroll to the next test. Repeat the number of trials to complete the test cycle for the chosen hand.
  8. When testing is completed for the chosen hand and the required data is recorded, press the [RESET] key to clear the previous test data. Repeat steps 2 through 9 for the remaining hand if desired.
  9. After all the test trials are completed, the test and calculation results can be viewed on the display by repeatedly pressing the [TEST] key. All results will be displayed in the sequence of: Test Trial 1, Test Trial 2...Test Trial N, AVG, STDEV, CV. There will be an indicator icon shown in the display for each respective result.
  10. Hold the [ON/OFF] button for two seconds to turn the instrument OFF when testing is complete and return it to a safe storage location.


Jamar Smart Digital Hand Dynamometer User Manual
 

Product Videos

Related Articles

{{x.Heading}}

{{x.ShortDescription}} ...

Share

Customer Reviews

Please enter your and your friends email address below.

Fields marked with * are compulsory

Your Name*
Your Email Address
Friend's Name*
Friend's Email Address
Message
The selected product information along with Reward Dollar coupon code has been successfully emailed to you and your friend.

Thank you for using www.healthproductsforyou.com

Close