Homecraft Steel Commode

Features

• Sammons Homecraft Steel Commode Includes:
  - Commode bucket
  - Cover
  - Splash guard
  - Snap-on seat with lid
• Weight capacity: 300lb
  

More Information

• Open up the frame and set legs on the floor. Alter the position of the sides so that they are 90-degrees to the back
• Depress the brass push pins and slide the front cross brace into the socket of the sides of frame
• Place the push pins over the holes on the side socket and release. Make sure the pins are pushed all the way through the holes to ensure the front of cross brace and sides are attached correctly
• Depress the push pins and slide the back brace of the frame through the holder on the back of cross brace. Again make sure the pins are snapped into the holes. Set the commode bucket into the cross brace and attach the commode lid to the back of the frame by snapping it securely on the frame
• To fold up the commode depress the push pins to release the cross brace for the frame of the commode
• Finish assembly by setting the leg height. Decide how high you want the legs, make sure the height is the same on all of the legs and insert buttons on legs into the corresponding holes
• This will lock the leg at your desired height, and you can check the positioning by trying to move legs up or down.
  
  

• Use a mild cleaning product no abrasive, scouring pads or solvents including lacquer thinner, turpentine or acetone.

• Supervision or assistance should be provided for users who are weak or tend to be imbalanced. Do not exceed the maximum user weight capacity of 300 lbs.
• Before usage, check the following: All legs are on the floor when open and set up. Snap buttons on legs protrude through the proper holes so that they are secured at an even height. The toilet seat is down before positioning
• Periodically inspect the rubber tips on the legs and that all nuts, bolts and screws are tight. If tips are torn or missing, replace them immediately.