Enovis Donjoy Isoform LSO+ Back Brace

Donjoy Isoform LSO+ Back Brace Features

• Low-profile design is easy to apply and remove
• Adjustable pull tabs help provide targeted compression and help reduce the rotation of the brace
• The semi-universal size and movable belt wings make it simple to change the fit for a variety of patients
• The pull tab method allows patients to localize compression by separately tightening the top and bottom

Enovis Isoform LSO+ Back Brace Helps with

• Sciatica
• Osteoporosis
• Spinal stenosis
• Spondylolisthesis
• Post-operative fusion
• Lumbar disc displacement
• Post-operative discectomy
• Pre and post-surgical care
• Post-operative laminectomy
• Lower back sprains or strains
• Stable/non-displaced fractures
• Acute and chronic low back pain
• Disc herniation and degeneration

How to Use Donjoy Isoform Back Brace?

To Remove the LSO+ Brace

- First, loosen it by detaching the pull tab from the loop exterior
- Then unhook the donning mitt from the loop exterior and take off the brace

To Re-Apply the LSO+ Brace

Step 1. Loosen the Brace

- Loosen the brace by detaching the pull tabs from the loop exterior
- Pull the belt wings in opposite directions

Step 2. Position the Brace

- Center the belt's rear section at the lower back's midline so the belt is just above the crease of the buttocks

Note: The brace is intended to be worn over clothing

Step 3. Secure the Brace

- Secure the hook portion of the donning mitt to the loop exterior
- Before tightening the brace, ensure the rear panel section is positioned evenly on both sides
- To tighten the brace, slip your thumbs through the holes in the pull tabs and pull the tabs away from your body
- Secure the pull tabs to the loop exterior
- Adjust the compression as needed

Use & Care Instructions:

• Before cleaning, open the rear panel pouch and detach the waist belt
• Remove the rigid rear panel from the pouch
• To detach the pull tab section, detach the rear panel section by unlooping the waist belt from the lacing guide panel
• Follow the reverse steps to put the brace back together after washing
• Hand washes in cold water, less than 86°F (30°C), using a mild soap
• Air dry

NOTE: If not rinsed thoroughly, residual soap may irritate and deteriorate the material

DonJoy IsoFORM LSO+ Back Brace User Guide