Answer: Placement
Apply the fully stretched brace making sure the back panel is centered and low on the back.
Overlap the tapered ends of the brace so the hook Velcro grips the opposite side as tightly as possible. Ends may be angled to accommodate for different anatomies.
Tighten and Adjust
Slip each thumb into the Form Fit pull tabs. Extend the tabs out and away from the brace. The left drawstring controls the compression on the lower portion of the brace, while the right drawstring controls the compression on the upper portion of the brace. Pull tabs do not have to be pulled equally, but should extend to patients preference.
When desired compression is achieved, touch the hook side of the pull tabs down onto the loop Velcro to secure.
HPFY Customer Care
Store answer
Helpful?