Armedica AM-SX1072 Hi-Lo Changing Table

Armedica AM-SX1072 Hi-Lo Changing Table is ideal for facilities that accommodate children and adults with special needs. It smoothly moves up and down with no horizontal travel. It allows easy patient transfer and access.

Why use Armedica Hi Lo Changing Table?

• Single section top piece
• Equipped with pivot down side rails 
• 18"-37" height adjustment with footswitch control
• 4 swivel locking casters for excellent mobility
• Heavy-duty motor with 400 lbs lifting capacity 
• Sturdy x-frame design with 11 gauge steel tubing

Armedica AM-SX1072 Hi-Lo Changing Table Features

• Equipped with heavy-duty motor, standard footswitch, high-low control and four locking swivel casters
• Better option for reliable, durable and treatment enhancing medical table
• High low changing table helps get rid of the back strain and pain caused by lifting and transferring the patients
• 1.5", firm density, thick foam padding provides years of dependable service and support
• Sturdy X-frame design makes use of 11 gauge steel tubing for years of intensive use
• Seamless upholstery design and rounded corners ensure use safety and enhance wear-resistance
• 34-ounce heavy-duty vinyl with antimicrobial protection keeps the patient more comfortable
• 4 swivel locking casters for safety and mobility
• Optional AMSX60 base adds 6" clearance for a patient lift
• When the base is installed, height range is approximately 22" - 41"
• 120-volt 60hz motor

• Side rails of Armedica AM-SX1072 Hi-Lo Changing Table rotate down and allow for easy patient access
• Securely lock in place when raised to keep the patient safe on the table
• Side rails length: 44"
• Extends up to 6.5" above upholstered table top

• Motorized Hi Lo Changing Table lowers to 18 inches above the floor for effortless access
• Motorized elevation of 37 inches helps to tend the patient in an upright position
• Easy lowering provides patient transfer with little aid
• Elevated position allows for an ideal interaction between caregiver and patient
• 18"-37" of height range provides maximum results with minimum efforts
• Full height adjustment and section mobility allows proper placement of the patient

• Armedica AM-SX1072 Hi-Lo Changing Table has 8 Basic colors and 3 Decorator colors (Merlot, Cappuccino and Patina)
• Decorator Colors have an ultra soft leather feel and soft hi-loft backing
• Treated with a proven vinyl protective coating that is engineered to create a tough, effective barrier against the three biggest problems encountered in environment: germs, abrasion and stains
• Offers superior bacterial protection that the healthcare industry can count on
• Guards against the surface growth of fungus mold and mildew spores
• Retains its good looks and is highly resistant to microbial deterioration that can cause cracking, splitting and loss of flexibility

What to buy with Armedica AM-SX 1072 Table

• Armedica Flexion Stool
• Medline Bed Assist Bar
• Mabis DMI Twin Folding Bed Board

How to use AM-SX Series Changing Table?

• Plug the power cord into a wall outlet
• No obstructions should be there near or under the table
• Apply the wheel brakes before transferring a person on or off of the table
• Raise or lower the Armedica Adjustable Treatment Table by pressing the up or down button on the foot control
• Adjust to appropriate height for wheelchair transfers and ergonomic working heights for caregivers
• Protect the vinyl with a waterproof cover­pad as needed during changing
• Note: Armedica AM-SX1072 Hi-Lo Changing Table is not to be used in a shower

• Raise or lower the safety rails by pulling sharply on the lock release handle.
• Both safety rails should be in the up position any time the Armedica Hi Lo Changing Table is occupied.

• Release the wheel brakes.
• Armedica AM-SX1072 Hi-Lo Changing Table is not intended for transporting an occupant.
• To prevent inadvertent damage, secure the foot control during transport.

• A mixture of mild soap and water is recommended for general cleaning
• A 10% bleach 90% water mixture is also acceptable
• Protex by Parker labs is a commercial disinfectant that is appropriate to use on our vinyl
• Harsh chemicals, petroleum based products such as massage oils, alcohol, and mineral oil should be avoided
• Such harsh products will strip the plasticizer, dry out the vinyl, cause cracks, and/or discolor the vinyl
• Do not put hot packs or similar directly on the vinyl