Aircast VenaFlow Elite System Cuffs

Why choose Cuffs for Aircast VenaFlow Elite System?

• Soft and breathable cuffs assist in increasing patient comfort
• Low profile, light-weight design
• Easily stored, easily transported
• Single or dual leg possible
• System automatically identifies attached cuff configuration
• Assists in increasing patient care, comfort and compliance

What to buy with Aircast VenaFlow Elite System Cuffs

• Aircast Shoulder Cryo/Cuff
• Aircast AirHeel Arch and Heel Support
• Aircast Pneumatic Armband

How to apply the Aircast Cuffs with the system?

1. Apply the cuffs with the tubing pointed towards the foot. Cuffs are hypoallergenic and maybe placed directly against the skin or overall a compression stocking. The performance of this device is consistent, no matter where this air cell is placed.
2. You may place the cuff in a posterior anterior or lateral position . In operating room it is advised to place the air cell in an anterior position to minimize movement during the surgical procedure.
3. Wrap the cuff around the leg.
4. Secure the cuff straps if they are snug but not tight. The cuffs are one size fits all and maybe trimmed for a more snug fit.
5. The next step is to connect the system.
6. Attach the tube assembly to the pump on end and to the cuffs on the other.
7. Press the green off/on button. The cuffs will fill instantly inflating the distal air cell first.
8. Then the promixal air cel a fraction of a second later after six seconds the cuffs deflate.
9. If you would like a single application only you must wait for cuff detention to complete at a 100%.
10. Then the screen will switch to ramp up. The screen will show a diamond icon on the left side of the screen indicating ramped up. 
11. When that diamond is gone, ramp up is complete during the three minute ramp up period. You must select singe leg application if desired.