Answer: How to Apply:
- Remove the liner from the brace
- The air bladder is inside the liner
- DO NOT inflate the bladder at this time
- Wrap the liner around the patient leg and foot
- Ensure the heel fits snugly into the portion first followed by the calf portion
- The wrap should fit snug, but not too tight
Note: It may be necessary to adjust the fit of the wrap if swelling or edema decreases during the healing process
- Attach one end of the straps onto outside of the struts
- In a seated position spread the side uprights of the brace and have the patient step into the boot
- The foot should be positioned flat with the heel in back of the boot
- Affix the uprights to the liner
- The uprights should be positioned parallel to the leg
- Close the straps starting at the toes and working up the leg
- Adjust the straps if necessary
Note: The high height walker has three top straps, whereas the low version has one top strap
- The air bladder can now be inflated to provide a customized fit
- To inflate, use the hand bulb by attaching to the valve/tubing in the front of the liner
- Squeeze the hand bulb repeatedly to inflate
- Inflate until the support feels stable with gentle cushioning but not too tight
Note: DO NOT OVER INFLATE
- Only inflated to a comfortable level
- Instruct the patient to check circulation to ensure not too tight
- Air may be released from the bladder if needed
- To release air, insert the bulb in engage the valve and squeeze the liner to deflate
- If slight air loss is experienced with extended wear, simply re-inflate following instructions
HPFY Customer Care
Store answer
Helpful?