3M Red Dot Monitoring Electrode

3M Monitoring Radiolucent Electrode Features

• Conveniently packaged in individual strips of ten electrodes for easy use and less waste
• Remains fresh for 30 days out of the bag
• Sticky gel delivers excellent trace quality resulting in better patient information
• Microreplicated Trace Prep surface gently prepares skin for optimal trace quality
• 3M Red Dot Monitoring Electrodes are ideal for ECG monitoring
• Stays secured in place for 3 days
• Sticky gel delivers excellent trace quality
• High-performance adhesive offers instant adhesion and up to five-day wear with excellent patient skin care and comfort
• Easy to apply electrotherapy electrode
• Provides high quality ECG traces

What to buy with Red Dot 3M Electrodes

• Pain Management Universal Electrotherapy Glove
• Medline Ultrasound Transmission Gel
• Pain Management Electrotherapy Electrolyte Spray

How to apply 3M Electrodes?

1. Clean the skin with soap and water.
2. If required, remove hair from the skin if there is excessive hair.
3. Apply the electrode and move the finger around the outside of the label to activate the adhesive.

How to remove 3M Red Dot Electrodes?

1. Loosen one side by grasping the full width of the electrode and then gently remove it in the direction of the hair growth.
2. Keep the electrode close to the skin surface as possible while lifting and supporting the skin by placing another finger adjacent to that region.

How to care for Electrode Pads?

• The TENS pads may be used multiple times and last longer with proper care.
• The skin should be clean and free of dirt and oils before applying the electrodes.
• Clean the electrodes with a damp cloth after use to remove all dirt and debris from them.
• You can gently rub the pads with a toothbrush to make them sticky again.
• After the treatment session, preserve these electrode pads safely in a cool and dry place in a resealable bag.
• Stick the pads onto the plastic film available in the kit.

Things to remember while using Electrode Pads:

• Do not submerge them in water. Do not remove them by pulling the lead wires.
• Do not bend or fold them. After use, carefully place them back on the protective liner.
• The electrodes should be replaced when they no longer adhere to the skin.
• The electrodes are intended for a single user.
• The same pads should not be used with other people to maintain hygiene.
• If irritation occurs, discontinue use and consult your doctor.
• Read the instruction for the use of electrodes before application.

Frequently Asked Questions

Q1. How long can the electrodes stay in place?

The electrodes stays secured in place for 3 days, and the adhesive can support wear for up to 5 days while maintaining comfort.

Q2. How should 3M electrodes be applied?

Place the electrode on the skin and move your finger around the label to activate the adhesive.

Q3. How do you safely remove the electrodes?

To remove it gently loosen one side of the electrode and remove it in the direction of hair growth while supporting the skin with another finger.