Respironics Amara View Full Face CPAP Mask

Features of Amara View Full Face CPAP Mask

• Respironics CPAP Mask is smallest and lightest of all the leading full-face masks
• This mask is intended to provide an interface for application of CPAP or bi-level therapy to patients
• The mask is for single patient use in the home or multi-patient use in the hospital/institutional environment
• The mask is to be used on patients (>66lbs/30kg) for whom CPAP and bi-level therapy has been prescribed
• Open vision design
• Under the nose cushion
• Universal size mask frame
• Short tube with elbow and swivel
• Minimal contact design
• Clear line of sight
• Easy to fit and seal
• Lightweight, flexible short tube

What to buy with Respironics Full Face CPAP Mask

• Maril Control III Disinfectant CPAP Cleaning Solution
• AG Industries Respura CPAP Mask Cleansing Wipes
• Hermell Softeze No Snore Pillow

How to clean Respironics Amara Face CPAP Mask?

1. Hand wash mask and headgear in warm water with liquid dishwashing detergent.
2. Rinse thoroughly. Air dry completely before use. Make sure the mask is dry before use. Lay the headgear flat or line dry. Do not place the headgear into the dryer.
   Caution: Do not use bleach, alcohol, cleaning solutions containing bleach or alcohol, or cleaning solutions containing conditioners or moisturizers. Any deviation from these instructions may impact the performance of the product. Inspect the mask for damage or wear (cracking, crazing, tears, etc). Discard and replace any components as necessary.

• Recent eye surgery or dry eyes
• Hiatal hernia
• Excessive reflux
• Impaired cough reflex
• Impaired cardiac sphincter function
• Patients unable to remove the mask by themselves

• This mask is not suitable for providing life support ventilation.
• If oxygen is used with the device, the oxygen flow must be turned off when the device is not operating. Explanation of the Warning: When the device is not in operation, and the oxygen flow is left on, oxygen delivered into the ventilator tubing may accumulate within the device enclosure. Oxygen accumulated in the device enclosure will create a risk of fire.
• At a fixed flow rate of supplemental oxygen flow, the inhaled oxygen concentration will vary, depending on the pressure settings, patient breathing pattern, mask selection, and the leak rate. This warning applies to most types of CPAP and bi-level machines.
• At low CPAP or EPAP pressures the flow through the exhalation port may be inadequate to clear all exhaled gas from the tubing. Some rebreathing may occur.
• Some users may experience skin redness, irritation, or discomfort. If this happens, discontinue use and contact your healthcare professional.
• Consult a physician if any of the following symptoms occur: Unusual chest discomfort, shortness of breath, stomach distension, belching, severe headache, blurred vision, drying of the eyes, eye pain or eye infections.
• This mask should not be used on patients who are uncooperative, obtunded, unresponsive, or unable to remove the mask