View product option

Drive Model 180 Nebulizer

Brand: DRIVE MEDICAL SKU: #180

Authorized Retailer

Q & A

Hygiene Products
Non Returnable
FSA approved
Size Chart

Product Option

Model 180

SKU #180

$131.24 Each

Request quote

Measure your peak flows and save yourself from an emergency room visit!

Drive Model 180 Nebulizer is operated by hand bulb or compressed air and is especially practical for administering vaporized medication to sensitive nasal passages. It is a very practical nebulizer for use where vapor instead of spray is indicated for the treatment of sensitive nasal cases. It is good for deep-seated conditions of the lower respiratory tract or very sensitive nasal tract.

Drive Model 180 Nebulizer Highlights:

Deep-seated conditions
Vented nasal guard
Very practical nebulizer

$170.69

Total: $131.24

Earn $6.56 in HPFY rewards

Features of Drive 180 Nebulizer

Specially suited for a solution with oil or glycerin base medications
All types of oil or water solutions can be used that are compatible with rhodium and nickel plating
Vented nasal guard restricts development of undesirable pressure, and small and large plain guards are provided for inflation purposes
Used by E.N.T doctors, research laboratories, veterinarians

Note: Prescription can be emailed or faxed to 1.203.616.2851. To email please: Click Here

How to use Drive Model 180 Nebulizer?

Use only solutions with an oil or glycerin base. For best results, fill bottle not more than one-quarter full.

Nebulizer can be operated with either compressed air or a hand bulb. If hand bulb is used, grasp the bulb firmly using the fingers against the palm of the hand, rather than two or three fingers against the thumb.

For a dry vapor, turn the little metal table inside the bottle to a horizontal position. For a moist vapor, turn it to a perpendicular position.

Nebulizer is equipped with both a vented and a plain nasal guard. The nasal guard with ventilating grooves prevents any undesirable excess of air pressure in the nasal cavities. This extra low-pressure feature ensures against any possible harm to delicate membranes.

The plain guard is for inflation purposes. In attaching either nasal guard to the nebulizer, give it a slight twist to make it fit tightly.

How to clean Drive 180 Nebulizer?

Unscrew and remove spray unit from the bottle.
Unscrew and remove glass tube with its metal ferrule.
Wipe the nozzle point clean. If this does not remove obstruction, run a fine wire through the glass tube and metal ferrule.
Replace glass tube and screw metal part to bottle.

How to sterilize Drive 180 Nebulizer?

Remove plastic nasal guard.
Disassemble the atomizer by rotating the cap in a counterclockwise direction.
The spray tube assembly can be removed from the cap by rotating it in a counterclockwise direction.
Boil metal parts and plastic guard.

Product Videos

{{x.ShortDescription}} ...

Customer Reviews

More Drive Nebulizers

${{ x.OurPrice | currency: "" : 2}}