Drive Deluxe Bariatric Shower Chair with Cross-Frame Brace

Features of Drive Bariatric Shower Chair

• Drive bariatric shower chair frame has width/depth cross braces attached with aircraft-type rivets
• Durable, blow-molded plastic bench
• The aluminum frame is lightweight, durable and corrosion proof drainage holes reduce slipping
• Euro-style clip for leg height adjustment Height adjusts in 1" increments
• Weight Capacity 500 lbs
• Made using recycled materials

What to buy with Drive Bath Bench

• Drive Deluxe Handheld Shower Massager With Three Massaging Options
• Drive Bath Mat
• Skil-Care Bath Mitt
• Medline Aluminum Foldable Toilet Safety Rail

How to Assemble Drive Medical Bariatric Shower Chair?

Assembling Drive Shower Bench leg receivers

• Take the seat and turn it upside-down so that the screw holes are facing upwards.
• Take the leg receiver labeled “#1” and place it into the groove labeled “#1” in the seat with the leg receiver holes pointing upwards.
• Take the leg receiver labeled “#2” and place it into the groove labeled “#2” in the seat with the leg receiver holes pointing upwards.
• Insert screw and washer into the center screw hole through both leg receivers but do not fully tighten the screw.
• Secure Leg Receiver #1 using 2 screws and washers.
• Secure Leg Receiver #2 using 2 screws and washers.
• Tighten the center screw.

Assembling Drive Bath Bench leg cross-brace

• Take the two leg cross-braces and place one on top of the other with the grooves properly aligned.
• Place 1 washer on the top side of the cross-braces.
• Insert screw through washer and into the center hole and secure with a nut.
• Position the cross-brace assembly in between the four legs and align the cross-brace screw holes with the cross-brace bracket screw holes.
• Insert a screw into each of the 8 screw holes and secure with a nut.

Assembling Drive Medical Bariatric Shower Chair legs

• Remove the U-shaped clip from each of the leg receivers.
• Insert a leg into each of the leg receivers.
• Adjust each leg to the same height and align the height-adjustment holes in the legs with the holes in the leg receivers.
• Use a U-shaped clip to secure each of the legs to the leg receiver.

Drive Bariatric Shower Chair User Manual

Safety Precautions while using Drive Shower Chair

• Ensure all screws, nuts, and bolts are tightened.
• Check the rubber tips on the leg extensions for rips, wear, or if they are missing. Immediately replace any or all if any of these imperfections exist.
• All four leg extensions with rubber tips must touch the floor simultaneously at all times.
• Do not stand on a chair.