Graham-Field Lumex Stand Assist Patient Transport Lift

Graham-Field Lumex Stand Assist Patient Transport Lift is a transport assistance unit, that keeps the resident actively engaged in the transport process. Transport functions of all kinds are quick, convenient, and require minimal caregiver assistance. Users grasp the middle bar and use their own strength to pull themselves up into position. The Stand Assist is a convenient toileting alternative to a wheelchair.

Lumex Stand Assist Patient Transport Lift Benefits

  • Padded dual knee pads and seat pads for comfortable transport
  • Stable base with locking rear casters
  • Fits easily through narrow doorways
  • Affordable alternative to electric sit-to-stand lifts
  • 400 lb safe working load
  • Made in USA

Why choose Graham-Field Lumex Stand Assist Patient Transport Lift?

  • Fits easily through narrow doorways
  • Padded split seat swings out to allow loading or unloading, then swings back to form a comfortable and stable transport seat
  • Affordable alternative to electric sit-to-stand lifts
  • This patient lift is designed for residents who have the strength and stability to lift and support themselves
  • Note: Personal injury - this device is designed for transport assistance of individuals between approximately 5;1" and 6;6" (155 cm and 198 cm) in height. Ensure the LF1600 properly fits the individual being transferred before use

What to buy with Manual Patient Lift


How to assemble Lumex Stand Assist Patient Lift?

  1. Place the base assembly on the floor and lock the back casters for ease of assembly.
  2. Insert the kneepads into the kneepad support unit. Install the two hex bolts through lock washers, flat washers, and kneepad support unit into nuts as shown above. Tighten securely with the provided wrench. Install the two plastic caps on the hex bolts.
  3. Attach the kneepad assembly to the two side support arms. Face the square holes on the side support arms inward; fit the square shoulder of each carriage bolt in the square hole, installing each carriage bolt through the kneepad assembly bracket and side support arm from the inside as shown above. Install the flat washer, lock washer, and acorn nut on the end of each carriage bolt as shown above. Do not tighten the nuts; some play in this assembly will be needed to assemble the entire unit
  4. Insert the two tubular crossbars into the holes on the seat pad and handlebar support units as shown above. Align the small holes on the cross bar undersides with the holes in the support units. Install the four button socket head cap screws through the support units into the cross bars. Use the hex key to tighten.
  5. Insert the kneepad side support assembly into the base brackets as shown above. The kneepads and arm curvature should be facing away from the lockable casters.
  6. Insert the seat and cross bar assembly into the tubes at the top of the kneepad side support assembly.
  7. Fasten the seat and cross bar assembly, kneepad side support assembly, and base assembly together with carriage bolts:
    • Attach the kneepad side support assembly to the base assembly. Fit the square shoulder of each carriage bolt in the square hole at inside of base bracket, installing each carriage bolt through the base and kneepad side support assembly as shown above. Install the flat washer, lock washer, and acorn nut on the end of each carriage bolt as shown above. Tighten the two nuts securely using the provided wrench. 
    • Attach the seat and crossbar assembly to the kneepad side support assembly. Fit the square shoulder of each carriage bolt in the square hole inside of kneepad side support assembly, installing each carriage bolt through the kneepad side support assembly and seat and crossbar assembly as shown above. Install the flat washer, lock washer, and acorn nut on the end of each carriage bolt as shown above. Tighten the two nuts securely using the provided wrench. 
    • Securely tighten the four nuts that attach the kneepad assembly to the two side support arms, installed in step 3, using the provided wrench. 
Warning: Before operating the Stand Assist, ensure that all components are properly and securely assembled and that all fasteners are secure.

How to operate Lumex LF1600 Patient Lift ?

1. Raise the two split seat units so that they are parallel to the side of the Stand Assist, as shown at right.
How to operate GF Lumex Stand Assist Patient Lift?
2. Have the patient positioned at the edge of the surface to be transferred from. Move the Stand Assist in front of the patient. Position the patient so that her feet are firmly on the platform and her knees and shins are in contact with the two cupped kneepads, as shown at right.
How to operate Lumex Stand Assist Patient Transport Lift?
3. Lock the casters by stepping on the caster clip and pushing down, as shown at right.
How to operate Lumex Stand Assist Transport Lift?
4. Have the patient grasp the cross bar closest to her and, using her own strength, pull herself up into a standing position securely on the base platform, as shown at right.
How to operate Graham Field LF1600 Patient Lift?
5. Lower both of the split seat units down into position to form a complete seat, as shown at right. WARNING: Ensure that both seat units are lowered and form a complete seat before having the patient sit down on the Stand Assist.
How to operate Lumex Stand Assist Lift?
6. Have the patient lower herself down onto the seat while keeping her knees and shins in the kneepads, and while continuing to hold the cross bar with both hands, as shown at right.
How to operate Graham-Field Lumex Patient Lift?
7. Unlock the casters. Place both hands on the cross bar furthest from the patient, as shown at right, and move the Stand Assist to the new surface. Ensure that the patient is secure and in proper position as described in Step 6 before and during transfer, as shown at right.
How to operate GF Lumex Patient Transport Lift?
8. Position the Stand Assist against the new surface, ensuring that the patient will be in a position to sit down firmly and safely on the transfer surface.
9. Lock the casters.
10. Have the patient pull herself back up to a full standing position.
11. Raise the two split seat units so that they are parallel to the side of the Stand Assist, as shown at right, to allow the patient to lower herself.
12. Stand beside the patient as she lowers herself down onto the new surface.
13. Ensure that the patient is safely positioned. Unlock the casters and move the Stand Assist to storage.
How to operate Lumex Patient Lift?

How to clean Graham Field Stand Assist?

  • Wipe off the frame at least once a week with a soft cloth. Dry the Stand Assist immediately if exposed to moisture.
  • Clean the frame every three months with a mild soap and water solution. The frame does not need to be waxed.
  • Clean upholstery and plastic components at least once a month with a mild soap and water solution.
    Note:
    • Do not use solvents, abrasive waxes, caustic chemicals or spray silicone to clean the Stand Assist
    • Do not use abrasive cleansers to clean the Stand Assist; they could scratch the finish
    • Do not use steam or high-pressure cleaners to clean the Stand Assist

Graham-Field Lumex Stand Assist Patient Transport Lift User Manual

Warning WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Graham-Field Lumex Transport Lift Specifications

Particulars

Dimensions

Maximum Width25"
Maximum Height

42.5"

Overall Length33.5"
Unit Weight

61 lbs

Front Base Height

5"

Graham Field LF1600 Patient Lift Warranty

The warranted components and time period are set forth below:
  • Frame - 3 years
  • Parts, including casters - 1 year

Customer Reviews

+=
Question

ItemName - now     10/18/2021

ItemQuestion
  Your question will show here once it will get approved.
Answer

UserName - now     10/18/2021

UserAnswer
  Your Answer will show here once it will get approved.

01

Question

charlie     01/24/2016

does one side fits all  an are the knee pads adjustable?

Answer

Customer Care    01/24/2016

This device is designed for transport assistance of individuals between approximately 5'1" and 6'6" (155 cm and 198 cm) in height. Ensure the LF1600 properly fits the individual being transferred before use. Page no. 7 of the attached MANUAL will assist you in KneePad Assembly.

{{x.Heading}}

{{x.ShortDescription}} ...

What is HPFY’s return policy?

Customer satisfaction is our top priority. We stand behind our products. If the merchandise you received is defective or not what you expected it to be, and you wish to return the item, please submit a return request in the My Account section of our website, contact our Customer Service department at (866) 316-0162 / (203) 616-2850 or email us.

  1. Merchandise must be returned within 30 days of the receipt of your order. Returns are not accepted after 30 days.
  2. Items (including parts and accessories) must be returned in new, unused, and resalable condition in its original packaging.
  3. Before returning any product, the buyer must obtain a Return Authorization Number (RA#) from a customer service representative. With your RA# you will receive a prepaid return shipping label.
  4. Orders returned without obtaining an RA# will be entitled to receive only "In-Store Credit" that can be used towards future purchases.
  5. Return orders are subject to a 20% restocking fees.
  6. All custom orders and hygienic items are non-returnable. Refer to the “Non-Returnable Items” section for further details.
  7. Returns will be reviewed and inspected before issuing credit. Please allow 3 to 4 weeks for processing. The credit will be applied to your original method of payment.
  8. If the return is the result of a defective product or shipping error, we will refund the entire purchase amount and return shipping costs.

Which products are Non-Returnable?

Due to the hygienic nature of some items, they are non-returnable. The items listed below are non-returnable:

  1. All hygienic items.
  2. Opened personal care items.
  3. Anything opened, used, or tried on.
  4. All customized items.
  5. Besides these, items that have the “non-returnable” phrase on the website.

We reserve the right to make adjustments due to errors, changing market conditions, product discontinuation or typographical errors in advertisements. Images on the site may not always reflect the actual product. Footrests or leg-rests are not included with wheelchairs unless specified.

How do I receive a return authorization number?

You can submit a return request by logging into your account. You will receive the Return Authorization Number (RA#) details in the email within 2-3 business days.

  • Login to your account
  • Go to “order history”
  • Click on “return order”
  • Fill out the return form and Submit it

If you do not have an email address, we will make other accommodations for RA# Details. Write the RA# on your label affixed to your package prior to shipment.

How long does it take to receive a refund?

Please allow 3 to 4 weeks to process the returns. Once the item is received, and inspected, your refund will be processed and automatically applied to your credit card or original method of payment.

Is there any Restocking Fees?

  1. 20% restocking fees will be applied.
  2. Outbound shipping cost is non-refundable.
  3. For orders that qualified for free shipping, $8.99 will be deducted from the refund if the product is returned.

More Manual Patient Lifts

{{'Buy ' + x.Name}}
{{x.Name}}
${{ x.OurPrice | currency: "" : 2}}
Please enter your and your friend's email address below.
Fields marked with * are compulsory
 
*
*
*
*

 
Submit Cancel
The selected product information along with Reward Dollar coupon code has been successfully emailed to you and your friend.

Thank you for using www.healthproductsforyou.com

Close