Vive Compact Power Wheelchair - Small

Vive Compact Power Chair Features

• Simple folding design: The power wheelchair is ideal for air travel, cruise ship travel, and similar outings.
• Durable frame: Constructed with lightweight aluminum and includes an adjustable footrest, armrests, and back seat height.
• Cushioned seating is covered with soft, breathable material for optimal comfort and includes an adjustable safety belt.
• Powerful Dual Motors: Powered by a rechargeable battery, the compact power wheelchair has a maximum speed of 4 mph and a driving range of up to 12 miles per charge.

What to buy with Vive Power Wheelchair

• Vive Mobility Clip-on Cupholder
• Vive Wheelchair Bag
• CareActive Wheelchair Winter Poncho

When to use Compact Power Wheelchair?

• Mobility issues.
• Spinal cord injuries.
• Back injuries.

How to use Vive Compact Electric Wheelchair?

• Place the folded Wheelchair on the ground with the wheels facing down.
• Place one hand on the frame at the front of the seat and the other hand on the top of the backrest. Pull the two halves of the Wheelchair apart while lifting to unfold the Wheelchair.
• Push the Chair Lock lever on the lower back portion of the frame down to lock the chair in the open position.
• Fold the footrest down.
• Lift the tension lever on the controller bracket to loosen the attachment clamp. Slide the controller bracket up the curved end of the armrest and push the tension lever back down to tighten the controller in place. Note: The controller can be attached to either armrest.
• Fit the controller cable into the cable clip fastened behind the armrest to keep the cable out of the way.
• Locate the battery on the underside of the seat. Cut the zip-tie that binds it to the frame between the battery holder bag and the seat. Slide the battery back towards the battery holder until it locks into place with an audible click.
• Attach the seat cushion using the velcro strips. Make sure the seat belt is not stuck underneath the seat cushion.
• Adjust the level of the armrests using the tension lever beneath the armrest pad. Lift the lever to release the tension, slide the support into a groove to set the new position, and push the lever back down to lock it in place. If the lever does not provide adequate tension, lift the lever, tighten the screw knob on the other end of the tension lever, and then refasten the lever down.
• Adjust the height of the seat back by loosening the screw knobs beneath the back end of each armrest, lifting/lowering the backrest to the desired height, and retightening the screw knobs.
• Switch the drive levers located behind each rear wheel from manual mode to drive mode.
• Pull out your anti-tip wheels by pushing in the switch on the side of the slide rail and pulling out the tipper wheels, repeat for both sides.

Vive Compact Power Wheelchair User Manual