Precision Medical PM15 EasyAir Compressor
Precision Medical PM15 EasyAir Compressor

Precision Medical PM15 EasyAir Compressor

Brand/Manufacturer: PRECISION MEDICAL, INC
Save
Authorized Retailer Badge

Precision Medical PM15 EasyAir Compressor has unique built-in hour meter that aids in determining when preventative maintenance is due. Both compressor filters are on the outside of the cabinet, making filter cleaning easier and more accessible for patients and caregivers. The basic function is to supply a portable compressed air source adequate to drive the high volume nebulizers.

Item #DescPkgRewardPrice 
PM15-P EasyAir Compressor Pressure Each $4.21
$580.97
$420.97
PM15-F EasyAir Compressor Flow Each $4.21
$580.97
$420.97

Features

More Information

  • Operating Instructions:
    - Become familiar with the Compressor.
    - Position the Compressor near a properly grounded electrical receptacle. Allow a minimum of 4 in (10 cm) clearance on all sides to ensure adequate air flow for cooling of the Compressor.
    - Ensure the On/Off (I/O) Switch is in the “OFF” (O) position.
    - Ensure the Power Cord is properly connected.
    - Attach appropriate device to the Outlet Fitting securely, without overtightening.
    - Pull Regulator Knob “OUT” to unlock regulator, then turn Knob fully counterclockwise. (Failure to do so may cause the device not to start.)
    - Press the On/Off (I/O) Switch to the “ON” (I) position.
    - Adjust pressure/flow.
    To INCREASE pressure/flow - Turn Knob CLOCKWISE
    To DECREASE pressure/flow - Turn Knob COUNTERCLOCKWISE
    - Push Regulator Knob “IN” to lock pressure/flow setting.
    - The compressor is now ready to use.
    - When the Compressor is not in use, press the On/Off (I/O) Switch to the “OFF” (O) position.
  • To clean the filter (weekly):
    - Unplug Compressor
    - Check air inlet filters for dust buildup
    - If dust buildup occurs, remove air inlet filters and wash in warm, soapy water and rinse
    - Absorb excess water from filter with a dry towel
    - Return the air inlet filters
  • Cleaning for Exterior Components:
    - Use a clean cloth or sponge dampened with soap and water.
    - Wipe dry with a clean cloth or paper towel.

Specification

ParticularsSpecification
DimensionsLength: 16 in (40.6 cm)
Width: 7.25 in (18.4 cm)
Height: 10.25 in (26.0 cm)
Weight19.5 lbs (8.8 kg)
ElectricalAC Input Domestic: 108 - 132 VAC, 60 Hz, 5 Amps
AC Input Export: 207 - 253 VAC, 50 Hz, 2.5 Amps
OutletGrounded 9/16 - 18 Male Threaded Fitting
Operating Temperature RangeTemperature Range: 40°F to 114°: (4.4°C to 45.5 °C)
Publish: 50°F to 104°: (10°C to 40 °C)
Transport / Storage RequirementsTemperature Range: -14°F to 120°F (-25.5°C to 48.9°C)
Publish: -4°F to 104°F (-20°C to 40°C)
Maximum Humidity: Max 95% non-condensing
Max Sustained Pressure60 psig (PM15P)
Output Flow @ Max SettingPM15F LPM - set value on the gauge ± 1. (Max flow setting = 13.0 l/min)
PM15P (E): Min 9 l/min @ 50 psig
Gauge Accuracy±3.2.3%
Noise level60 db @ 1 meter
Safety SystemsHigh Temperature Motor Shutdown, Class B, Thermal Limit Automatic Reset
Equipment ClassificationClass I - with respect to protection from electrical shock
Type B - degree of protection against electrical shock
IPX0 - degree of protection against ingress of liquids
Mode of OperationContinuous

Warranty

1 Year warranty

Customer Reviews

Questions & Answers


 
 
Please enter your and your friends email address below.
Fields marked with * are compulsory
 
*
*
*
*

 
SubmitCancel
The selected product information has been successfully emailed to your friend.

Thank you for using www.healthproductsforyou.com

Close