NOA Medical Elite Bariatric Hospital Bed
NOA Medical Elite Bariatric Hospital Bed

NOA Medical Elite Bariatric Hospital Bed

Brand/Manufacturer: NOA MEDICAL
Save
Authorized Retailer Badge

NOA Medical Elite Bariatric Hospital Bed comes with a comfortable 42 inches wide sleep deck that easily adjusts from 80" to 84" in length and side rails which are made with a soft touch vinyl coated steel skeleton. The vinyl coating protects the residents from accidental bruising and the steel skeleton provides a rigid hand hold for ingress/ egress and repositioning.

Buy this product and earn 45.61 Reward Dollars.

1080002BEI

  • ORDERING DETAILS
  • Bed Options
  • Soft-Touch Head Side Rails
  • Head and Foot Boards Options
  • Foot Board Control Kit
  • Assist Rail
  • Trapeze Options
  • Mattress
  • Optional Accessories
  • Total: $6250.75
    Total: $4560.99
Total: $6250.75
Total: $4560.99

Features

  • NOA Medical Elite Bariatric Hospital Bed can be put into a recliner position with the bed in a reverse trendelenberg position and the knee gatch and head deck raised for greater resident comfort
  • Designed for 800 pound work load, and is sturdy throughout, with four motors providing the typical high/low, head and knee functions found on better resident room beds
  • Priced with white glove service that includes set up and delivery to the facility
  • Comes with a transparent trolley system which allows movement of the bed from one room to the other or upright storage to save space when not in use
  • Soft-touch side rails
  • Polyethylene head and foot boards
  • T/RT capable
  • Baseboard bumper
  • Entrapment compliant
  • Safety Lock for Immobilization
  • Mattress Keepers
  • Can be moved at any height, at any position or locked in place
  • Comes in Beige color

More Information

  • Warnings:
    - Do not operate this equipment without first reading and understanding this manual. If you are unable to understand the warnings, cautions or instructions, contact a health care professional or a qualified technician before using this equipment. Otherwise injury or damage may result.
    - The correct bed height when unattended is based on the residents knee to floor height, mobility, and cognitive level. For residents with good mobility and cognition, the top of mattress should be at a height so that the residents feet are flat on the floor and the angle between the thighs and calves is 90 degrees. Bed height and the residents abilities must be evaluated by a medical professional
    - If the residents physical or mental state may lead to entrapment, the sleep deck should be left in the flat position when unattended
    - Do not use near explosive gases
    - Possible fire hazard when used with oxygen administering equipment other than nasal or masked type
    - When using nasal or masked type administering equipment, oxygen or air tubing MUST be routed and secured properly to ensure tubing does not become entangled, kinked, or severed during normal operation of the bed
    - Close supervision by a caregiver is necessary when this product is used near CHILDREN OR PEOPLE WITH DISABILITIES
    - NEVER PERMIT ANYONE UNDER THE BED AT ANY TIME
    - When operating or moving the bed always ensure that the individual utilizing the bed is positioned properly within the confines of the bed. DO NOT let any extremities protrude over the side or between the rails when performing these functions
    - After installation and before use, make sure all attaching hardware is securely tightened
    - Pendant cord must be routed and secured properly to ensure cord does not become entangled and damaged during normal operation of the bed
    - Keep all moving parts free from obstruction i.e. blankets/sheets, heating blankets/pads, tubing, wiring, etc. which may get tangled around the bed, side rails, or legs during operation of the bed
    - Beds are equipped with locking casters. Casters should be locked at all times except when moving the bed or when operating sub acute care features
    - Do not roll the bed over abrupt thresholds with a resident in the bed
    - The mattress should be a healthcare type mattress to allow for proper bed articulation. The mattress must be properly sized to meet entrapment zone dimensional guidelines published by the FDA
    - The side rails are NOT intended and may NOT be used as a restraint. If necessary, a physician or healthcare professional should be consulted for other means of safe restraint
    - When using side rails, if excessive side pressure is exerted on them they can be deformed or broken. Do not use side rails as handles to move the bed
    - Never permit more than one person in/on the bed at any time
    - Body weight should be evenly distributed over the surface of the bed. The bed weight capacity is 500 pounds. This is the total weight of the resident/patient, mattress, bedding, head and foot boards, side rails and any other accessories
    - Do not lie, sit, or lean in such a way that your entire body weight is placed only on RAISED head or foot sections of the bed. This includes while assisting the user in repositioning or transferring in or out of bed
    - The bed is provided with an additional safety feature of a protective earth ground. The electrical cord should only be plugged into a GROUNDED 110/120V outlet. DO NOT ALTER THE PROVIDED PLUG. If the plug does not fit the existing outlet, a licensed electrician should install a correct outlet. Never operate the bed if it has a damaged cord or plug
    - Unplug the power cord when performing any maintenance on the bed
    - Do not open any actuator, pendant, or control box. If these units are opened the warranty is voided
  • Steps to Prevent Bed Fires:
    - Inspect the beds power cord for damage
    - Connect the power cord directly into a wall-mounted outlet that is in good working order, with no cracks or chips. The plug should fit tightly into the outlet. The ground pin should be intact and secure
    - Do not connect the beds power cord to an extension cord or to a multiple-outlet strip
    - Do not cover any power cord with a rug. Heat may build up or the cord may be damaged
    - Inspect the floor beneath the bed for buildup of dust and lint. Ask housekeeping to clean if necessary
    - Inspect the patients bed controls, looking for signs of damage where liquids could leak in
    - Test the bed and its controls, including patient lockout features, to ensure that the bed can move freely in both directions without damaging any cords
    - Check monitors and other patient equipment for signs of overheating or physical damage
    - Keep linens and clothes away from power sources
    - Tell maintenance staff about any unusual sounds, burning odors, or unusual movement of a bed
    - If you suspect overheating, follow your facilitys policy for fire safety and get the patient/resident to a safe area if necessary

Specification

Options

80" Length

84" Length

Bed width

42"

42"

Bed width, with side rails

47"

47"

Sleep deck length

80"

84"

Overall bed length

84.5"

88.5"

Deck height range

9.5" to 30"

9.5" to 30"

Safe working load

800 lbs

800 lbs

Maximum Back Angle70°
Maximum Hip to Knee Angle45°
Maximum Ankle to Knee Angle10°
Weight285lbs

 

Warranty

  • Welds: Lifetime
  • Electrical components: 3 years
  • Mechanical components: 3 years
  • Casegoods and wood products: 1 year

Customer Reviews

Questions & Answers


 
 
Please enter your and your friends email address below.
Fields marked with * are compulsory
 
*
*
*
*

 
SubmitCancel
The selected product information has been successfully emailed to your friend.

Thank you for using www.healthproductsforyou.com

Close