Online since 2002 |   866-316-0162

View product option

Kaz Vicks Healthmist Ultrasonic Humidifier

Kaz Vicks Healthmist Ultrasonic Humidifier boils water to a pure steam vapor up to 96 percent bacteria-free and returns moisture to the air to help the user breathe and sleep more comfortably. The ultrasonic humidifier mixes with dry air in the cooling chamber to release warm and moist air into the room and provides relief from cold and flu symptoms.

Vicks Healthmist Humidifier Features

  • Filter-free, cool mist
  • Variable mist controls
  • Scent pad heater provides soothing comfort - for use with Vicks VapoPads
  • Large tank for easy cleaning
  • Directional Mist Outlet, which lets you control the direction and intensity of the mist

Vicks Healthmist Ultrasonic Humidifier Parts

Healthmist Ultrasonic Humidifier Parts

What to buy with Humidifiers

How to use Vicks Ultrasonic Humidifier V5100NS?

Filling the Water Tank of Humidifier

  1. Remove the Water Tank from the Base and turn it upside down. Turn the Tank Cap counterclockwise to open. Rinse and wipe clean.
  2. Fill the Water Tank with clean, cool, tap water and replace the tank cap by firmly turning clockwise. Turn the Tank upright and check Tank Cap for leaks. If any water drips from tank cap, remove it and re-tighten. Use of very cold water may temporarily reduce the mist output. Never fill the humidifier with hot or warm water as this could cause damage and void your warranty.
  3. Inspect the Base and Nebulizer for cleanliness.
  4. Replace the Water Tank on the Base.

How to operate Vicks Humidifier?

  1. Do not operate the humidifier without water in the Water Tank.
  2. After filling the humidifier, be sure the Power Knob is in the OFF position, then plug the power cord into a 120 volt AC wall outlet.
  3. Turn the Power Knob to the On position and then set mist intensity.
  4. Mist will not appear immediately; allow a few minutes for the water to fill the Reservoir. If you are using a new Demineralization Cartridge, it may take up to fifteen minutes for the filtering material to become saturated and for mist to appear.
  5. Direct Mist Nozzle away from walls and furniture. If condensation forms on walls or windows, or if indoor relative humidity exceeds 50%, reduce mist intensity setting, open door to room where humidifier is operating, or turn unit off.
  6. If mist is not produced, unplug cord and check the Water Sensor in the Reservoir to ensure it is in contact with the water. The water level in the Base must be high enough to partially immerse the Water Sensor in order for the humidifier to work.
  7. Turn the humidifier off before removing and refilling the Water Tank. When the tank is empty the mist will stop although the fan will continue to operate.

How to care for Kaz Vicks Healthmist Ultrasonic Humidifier?

Daily Maintinance

  1. Lift the water tank from base and empty all water from the Reservoir. Remove the tank cap and drain any water from the water tank. Wipe it clean with a soft, damp cloth. The mist nozzle should be removed during cleaning to prevent damage.
  2. Do not immerse the base in water. Gently wipe the reservoir with a soft, clean, wet cloth. Do not attempt to remove or in any other way modify the water sensor. Use care when wiping around the water sensor; it is delicate and can be easily damaged. Rinse the water tank with lukewarm water after each use. For storage, wipe dry with a soft, clean cloth. Keep water away from the air outlet.
  3. Do not use detergent to clean any water-containing parts of the humidifier. Detergents and the film they leave behind can affect the output of the humidifier. Do not use abrasive cleansers or brushes.
  4. Do not leave water in the Water Tank or Reservoir when unit is not in use as it may result in the build up of mineral deposits and bacteria that can inhibit the output efficiency of the humidifier. Please note that if water remains in the Water Tank for more than a day or two, bacterial growth is possible

Weekly Maintenance 

  1. Thoroughly clean humidifier every week using a solution of bleach and water (one teaspoon of bleach in one gallon of water). Fill water tank partially with this solution, let stand twenty (20) minutes, shaking vigorously every few minutes, drain and rinse with clean water until the bleach smell is gone.
  2. Wipe the reservoir with a soft cloth dampened in the solution. Rinse area thoroughly before proceeding.
  3. If mineral deposits are evident around the nebulizer and water sensor, clean their surfaces with a soft, clean cloth and a small amount of undiluted white vinegar. If necessary for removal of mineral deposits, mix a solution of 50% white vinegar and 50% water and fill the base with enough solution to cover the nebulizer. Allow it to soak for an hour. Then use a cotton swab to gently loosen buildup on the nebulizer. Rinse out the reservoir and wipe clean. Do not touch nebulizer with bare fingers as any fingerprints or other residue can affect mist output. Be careful not to damage the water sensor.
  4. Remove VapoPad when finished. Do not pour water or detergent into the scent Pad slot. Scent Pad slot can be cleaned with a cotton swab only.
  5. All surfaces should be thoroughly cleaned with water prior to reuse.

End of Season Maintenance 

  1. Follow above weekly cleaning procedure at the end of the humidification season, or when the humidifier will not be used for several days, being sure to dry all parts, including the inside of the water tank. Do not store with water inside.
  2. Leave tank cap partially loosened during storage to prevent tank cap and gasket from sticking together. This will prolong the life of the gasket.
  3. Clean the water tank and base after long periods of storage

Kaz Vicks Healthmist Ultrasonic Humidifier User Manual



Customer Reviews


{{x.ShortDescription}} ...


Please enter your and your friends email address below.

Fields marked with * are compulsory

Your Name*
Your Email Address
Friend's Name*
Friend's Email Address
The selected product information along with Reward Dollar coupon code has been successfully emailed to you and your friend.

Thank you for using