Features
- Drive Silver Sport 1 Single Axle Wheelchair comes with push to lock brakes
- Carry pocket on backrest provides additional convenience
- Comes with swing-away footrests
- Nylon upholstery is durable, lightweight, attractive and easy to clean
- Padded armrests
- Plastic footplates
- Powder coated silver vein steel frame
- Urethane tires mounted on composite wheel provides durability and low maintenance
- Click here for user manual
More Information
- Caution:
- Stability: Wheelchair is designed to be safe and stable as long as the center of gravity is maintained while going about normal activities. Care must be taken while performing activities that shift your center of gravity in the chair. Never reach so far that require you to shift in the seat or bend over out of the chair. When you have to reach for objects that require you to lean, be certain front casters are pointing in a forward position that extends the wheelbase and will stabilize the chair
- Ramps: Be sure of your own capabilities, limitations, and strength before attempting to go up a ramp. Correct techniques on ramp negotiation should be shown to you by a qualified professional. Assistance is recommended when going up or down inclines greater than 10o. If you must stop on an incline, avoid sudden, abrupt movement when you resume movement. Because of the backward angle of the chair, the sudden abrupt movement could cause instability. Attempting to use the wheel lock brakes could result in accidental locking, tipping to one side, or cause a sudden stop. Avoid changing direction when going down an incline, as this could result in instability of tipping over - Warning:
- This wheelchair has not been approved as a seat that can be used within vehicles of any kind. Always transfer wheelchair user to vehicle manufacturers approved seat and use safety restraints available
- Do not operate this wheelchair on roadways, streets or any surfaces with vehicular traffic
- Do not attempt to operate on inclines 10% or greater without proper assistance
- Be sure to completely engage wheel locks when getting in and out of wheelchair or when in elevator or wheelchair lift
- Wheelchair should be on a smooth, stable and level area with wheel locks engaged before transferring user in or out of wheelchair
- Do not adjust footrests any lower than 2-1/2” from floor
- When getting in or out of wheelchair, do not stand on or apply weight to foot rests
- Before reaching or leaning forward, rotate casters to front of the wheelchair engage wheel locks to help prevent wheelchair from tipping over
- Do not lean over or apply weight to the top of wheelchair back. This can cause the wheelchair to tip over. When trying to extend arms over back, only reach as far as your arm can extend without having to alter your seating position
- DO NOT stand on wheelchair
- DO NOT use wheel locks to slow your descent down an incline
- Abruptly changing directions while going down an incline could cause instability or possible tipping over
WARNING: Cancer and Reproductive Harm –
www.P65Warnings.ca.gov Specification
Particulars | Dimensions |
Overall Width (open) | 24" |
Overall Width (closed) | 11" |
Overall Height | 36" |
Seat To-Floor Height | 19.5" |
Back Height | 16" |
Seat Width | 18" |
Seat Depth | 16" |
Overall Length (with rigginges) | 43.5" |
Product weight | 37lb |
Weight limit | 250lb |
| Overall Height (Folded) | 30" |
Warranty
3 year limited warranty Questions & Answers
 | ItemQuestion ItemName - now |
|
Your question will show here once it will get approved. |
 | UserAnswer UserName - now Your Answer will show here once it will get approved. |
|
| are the foot rests removable" thanks bob hamilton - 3/6/2016 7:39:55 PM | | |
 | Thank you for reaching out to us. the information provided by the manufacture says that Do not adjust foot rests any lower than 2-1/2" from floor. Customer Care - 3/7/2016 2:16:42 AM |
|
