Medline Composite Transfer Benches

Features

• Medline Composite Transfer Benches are durable rustproof plastic benches
• No tools are required to assemble
• Seat Height: 17" to 21" (43cm to 53cm)
• Seat Width: 17.5" ( 45cm) 
• Seat Depth: 29.5" (75cm)
• Weight capacity: 350lb
• Instruction Manual

More Information

• To Assemble:
  - Place seat  upside down on a flat surface
  - Insert leg  into the corner recess of the seat by applying a firm downward pressure until the leg is fully engaged. Repeat this step with the remaining 3 legs
  - Place the bench upright and insert the arm into the holes on the side of the bench until fully engaged
  - Insert back, after determining which way the bench will be used, into the slot at the rear of the seat until fully engaged
  - Insert the plastic insert (not pictured) into the slot opposite the backrest
  - To adjust the legs for proper height or uneven surfaces, rotate the leg extension and disengage from the leg
  - Insert the leg extension into the desired slot until the adjustment is fully engaged
• To Disassemble:
  - The back has a lock tab that, when depressed, allows the back to be pulled out of the slots
  - To remove the arms, pinch together the tabs on the arms (when assembled, tabs will be under the seat)
  - Do not remove legs as this may cause damage to the product
  - The legs were not designed to be removed after assembly
• Care and Maintenance:
  - Do not use an abrasive cleaner
  - Use a non-abrasive cleaner with warm water
  - Periodically inspect all components for damage or looseness
• Warning:
  - Do not use this product without first reading and understanding the instruction sheet. Otherwise, injury or damage may occur.