Convaid Rodeo Tilt-In-Space Wheelchair - Transit Model

Convaid Rodeo Tilt-In-Space Wheelchair Features

• 5 to 45 Degrees of Adjustable Tilt
• Quick Release Rear Wheels
• Silver Powder Coated Frame
• Single Foot Activated Wheel Locks
• One Piece Height Adjustable Push Handle
• Closure Strap
• Foot Positioners
• One Piece Angle Adjustable Footplate
• Seat Depth Growth of 5"
• Transit Anchor Brackets
• 3-Pt Positioning Belt with Depth Adjustable Crotch Strap
• H-Harness with Padded Covers
• Elevating Legrest
• Headrest Extension
• 7.5 x 2" Front, 11.5 x 2.5" Rear Solid Tire
• Cordura Upholstery
• Zippered Pockets in Seat Bottom Upholstery
• Tool-less Upholstery Removal 
• Made in the USA

Convaid Rodeo Transit Wheelchair Benefits

• Made specifically for use in transit
• Can be ordered with a range of accessories
• Adjustable seat depth extends chair life for a growing child
• Easy to fold for maximal portability, available in various sizes
• Provides up to 45-degrees of adjustable tilt that offers pressure relief and upper body support
• Cordura upholstery comes in a wide selection of colors and is removable and fully washable
• Offers 90 to 110 degrees of recline, allowing variance in the seat-to-back angle
• Firm lateral thoracic supports maintain midline positioning of your child's trunk
• WC19 transit approved, i.e. crash tested frame complies with the design and performance standards necessary for users traveling in motor vehicles

What to buy with Convaid Rodeo Wheelchair

• Sammons Preston Comfort Seat
• Multi-Mount Drink Holder
• Sammons Preston Adult Foam Torso Support

How to operate Rodeo Tilt-in-Space Wheelchair

• Unfolding the Chair:
  1. Lay chair down with seat facing upward.
  2. Unbuckle closure strap.
  3. Push in gray buttons on leg rest extensions and swing them out and upward until parallel with the ground.
  4. Open folded footplate and attach calf support to footplate with Velcro.
  5. Apply wheel lock.
  6. Push in gray buttons on push handle, and lift upward until the handle is at a 90-degree angle with the chair.
  7. Place foot on the caster tube and push against back tubes using both hands. Make sure the safety lock clicks into place by visual inspection on both sides.
  Warning: Make sure the safety lock clicks into place. Two clicks will be heard. Look to see that safety lock pins are visible and fully exposed on both sides.
  8. Adjust push handle and footplate into the desired position.
  9. If applicable, lower armrests, unfold lateral trunk supports and place seat cushion onto seat upholstery.


• Folding the Chair:
  1. Before folding, front wheels of the chair should be in a forward facing position.
  2. Apply wheel lock by pushing wheel lock bar downwards.
  3. Position chair in a fully upright position (not tilted or reclined).
  Warning: Keep fingers free of the folding mechanism.
  If applicable, flip up armrest fold lateral trunk supports and remove seat cushion.
  4. Push in gray buttons on leg rest extensions, swing them upward until parallel with the ground. Detach the calf panel and fold up footplate.
  5. To disengage safety lock, grasp red levers and simultaneously squeeze them together with one hand. With the other hand hold, top of push handle pulling towards you.
  6. Pushchair downward into the folded position.
  7. Push in gray buttons on the push handle, and rotate handle back on to the chair.
  8. Secure closure strap to hold the chair in the folded position.
  9. Push in gray buttons on leg rest, and rotate leg rest under the chair.
  10. With a straight back, bend knees and lift chair.


• Performing the Recline Function:
  Recline Position -
  1. Rotate Push Handle downward: Push-in the Grey Push Buttons located on the side of the Push Handle, at the same time, rotate the Push Handle downward.
  2. Recline the seat back: Lift Push Handle upward to relieve the occupant weight. At the same time, pull upwards on the Recline Pull Loop, and recline the seat back to the desired position.
  Upright Position -
  To return the seat back to upright position repeat steps 1 and 2. Push seat back up to bring upright, instead of reclining down.


• Tilt Adjustment:
  The tilt feature allows for added comfort and/or convenience during feeding. To tilt, squeeze the tilt lever on the chair handle and push down. Release the lever when the desired angle of tilt has been achieved.

Manuals of Rodeo Tilt Wheelchair

• Convaid Rodeo User Guide
• Rodeo Recline Instructions
• Instructions for Attaching Foam Tray
• Instructions for Seat Depth Adjustment