Winco Designer Padded Vinyl Blood Drawing Chair
Winco Designer Padded Vinyl Blood Drawing Chair

Winco Designer Padded Vinyl Blood Drawing Chair

Brand/Manufacturer: WINCO
Save

Winco Designer Padded Vinyl Blood Drawing Chair can easily be adjusted up or down based on the height requirements of the phlebotomist, doctor, nurse or clinician. Additionally Designer Blood Drawing Chair features a footrest with a no-slip grip and high impact leveling feet. The chair combines functional design with quality and durability.

Buy this product and earn 8 Reward Dollars.

2578

  • ORDERING DETAILS
  • Color
    View Color Swatches
  • Optional Accessories
  • Inside Delivery and Set Up
  • Total: $1050
    Total: $799.9
Total: $1050
Total: $799.9

Features

  • Winco Designer Padded Vinyl Blood Drawing Chair has comfortable padded seat and backrest
  • Flip-Up adjustable height contoured urethane armrest
  • Regulate to personal height preference
  • High-impact, leveling feet provide stable seating on almost any surface
  • Manufactured with sturdy, powder-coated steel frames for maximum strength and years of trouble-free service
  • Over 5" of seat height adjustment
  • Click Here for Owners Manual
  • Intended use:
    - Blood Drawing Chair is a chair intended for use in medical settings
    - It is designed without wheels and is not electrically powered
    - It is intended for use in blood donation, collection, or sampling procedures
  • Note:
    - SilverTex is not recommend for applications involving frequent contact with bodily fluids where bleach is the preferred or required cleaner. Bleach is not advised for cleaning SilverTex.

More Information

  • Tools Needed:
    - Multiple size wrench included (your own 7/16” or adjustable wrench)
    - 3/16" Hex "Allen" wrench included
    - "Phillips-head" screwdriver – for checking tightness of all screws after shipping
    - Scissors or box cutter
    - Powered tools not recommended
  • Seat Installation:
    1. Position Chair Frame in upright position. Check tightness of all installed screws, bolts, nuts and other fasteners in case they loosened during shipping.
    2. Align the screws on bottom of the Seat Assembly, with the Seat Support holes. (Hole spacing of Seat Supports will be narrower toward front of Chair). Seat can only be properly installed facing one direction. Be sure that all (4) Seat Screws go completely through the Seat Support straps on chair frame.
    3. Install (4) lock nuts to the screws on the Seat Assembly and completely tighten with 7/16" wrench.
  • Arm Installation:
    1. Insert it into the Receiving Tube on Seat Frame Assembly.
    2. Then adjust the arm to the desired height and tighten the knob. Screw the Knob into the Slot. This will “capture” the arm and keep it from being able to be pulled out of the frame accidentally.
  • Cleaning Instructions:
    - Remove grime, hair and body oils.
    - Your furnishings should be cleaned with mild soap and water solution and a damp cloth on a regular basis (especially where skin and hair make contact with upholstery).
    - Avoid harsh detergents that could damage the upholstery or finish of your recliner. If the furnishing is disinfected with bleach, it must be wiped off using only clean water on a damp cloth and then be allowed to air dry. Failure to rinse upholstery with clean water can result in a build-up of residues over time that can dry out the upholstery and cause changes to the look and feel of the upholstery and eventually can lead to cracking.

Specification

Options

Dimensions

Seat Height

25.5" to 31"

Seat Width

19"

Seat Depth

19"

Overall Height

47" to 52.5"

Armrest Height

33" to 44.5"

Overall width

27.5"

Seat Back Height

24"

Length

27"

Weight

73lb

Weight capacity

300lb

Warranty

  • LIMITED ONE YEAR COMPLETE PRODUCT WARRANTY:
    - Winco warrants the complete product for one (1) year. At Winco sole discretion, it may repair or replace any components freight free that are found to be defective during the fi rst year. Winco shall not be liable for any labor, or any other costs incurred as a result of or in conjunction with a warranty claim
  • LIMITED THREE YEAR WARRANTY:
    - Winco warrants recliner mechanisms, electrical components, vinyl panels and Vinyl on upholstered parts [from cracking or delaminating] pressurized gas springs, and casters, when new, for a period of three (3) years. At Winco Sole discretion, it may repair or replace components found to be defective. Winco shall not be liable for any labor, shipping or any other costs incurred as a result of or in conjunction with a warranty claim
  • LIMITED LIFETIME CHAIR FRAME WARRANTY:
    - Winco warrants steel and aluminum base frames for all products, when new, for the lifetime of the original purchaser. This limited warranty does not apply to paint/fi nish or any components attached to the frame such as; upholstery, foam, casters, mechanisms or related parts that are covered under above warranties. Winco shall not be liable for any labor, shipping or any other costs incurred as a result of or in conjunction with a warranty claim

Customer Reviews

Questions & Answers


 
 
Please enter your and your friends email address below.
Fields marked with * are compulsory
 
*
*
*
*

 
SubmitCancel
The selected product information has been successfully emailed to your friend.

Thank you for using www.healthproductsforyou.com

Close