HDM Extended Life Battery for Z1 and Z2 Travel CPAP Machines

Features of Replacement HDM Z1 & Z2 Extended Battery

• The Extended Life Battery has twice the capacity of the original battery
• Allows the user to use their CPAP machine without plugging it into an outlet
• Battery modules will automatically recharge in the PowerShell when you plug it into AC or DC power

Estimated Run time of Extended Life Battery

Manufacturer testing shows that the Extended Life Battery will power a Z1 CPAP for 8.9 hours at 20 cmH2O. These results were obtained via bench testing under simulated operating conditions. Actual run time may vary due to machine settings, machine pressure, and personal breathing. Lower pressures will result in longer battery operating time.

What to buy with HDM Z1/Z2 Extended Life Battery

• Vive CPAP Pillow
• Maril Control III Disinfectant CPAP Cleaning Solution
• AG Industries Respura CPAP Mask Cleansing Wipes

How to charge HDM Z1 & Z2 Extended Life Battery?

• The Z1 or Z2 and the battery are fully inserted into the PowerShell, plug the power supply (AC to DC Adapter) into the wall outlet.
• To charge the battery, the Z1 or Z2 must be in standby mode (display reads 0.0).
• The battery status indicator on the Z1 or Z2 will flash when the battery is charging.
• The number of solid bars indicates the current level of charge.
• The battery charging is complete when the 4th bar stops flashing.

Please Note:

• If the PowerShell does not appear to be charging, disconnect the Z1 or Z2, battery and power supply and reassemble.
• Make sure you hear the components click together and see that the DC plug (silver cylinder in the bottom of the PowerShell) goes into the hole in the CPAP and then reattempts to charge the PowerShell.