Online since 2002 |   866-316-0162

Proactive Protekt Aire 4000 Pump

Authorized Retailer Badge


Item# Description Pkg reward$ Price Blank
Item #: 80041
11" x 8" x 4"

Proactive Protekt Aire 4000 Pump is to be used with Proactive Protekt Aire 4000 Low Air Loss And Alternating Pressure Mattress System. The high volume user-friendly pump combines low air loss and alternating pressure in one unit and the air flow and pressure range can be customized according to each individual patients weight. The adjustable comfort settings allow pressure to be customized according to each patients therapeutic requirements while the "static" mode provides firm support for easy patient transfer.

Protekt Aire 4000 Pump Highlights

  • Low pressure alarm mute button
  • UL/CSA approved power cord
  • Weight Capacity: 350 lbs
  • Dimension: 11" x 8" x 4"
  • Weight: 6.2lb

Proactive Protekt Aire 4000 Pump Features

  • Proactive Protekt Aire 4000 Pump has a static function for safe and easy patient transfer
  • High flow pump with 8 liters of air per minute
  • Low-pressure alarm indicates when the pumps airflow may be compromised
  • Preset 10 minute alternating cycle
  • Low air loss and alternating pressure therapies in one system

How Protekt Aire 4000 Pump works?

Proactive Protekt Aire 4000 Pump

  • Power Key (1)
    • Press the Power key on the panel, and the pump will start/stop operation.
  • Press Weight Range (2)
    • Press up or down buttons to select the correct patient weight.
  • Alarm Mute (3)
    • The audible alarm turns on when the mattress pressure is low.
    • Press the button to mute the alarm.
  • Static mode(4)
    • Press to set the air mattress in static therapy mode. The function will revert back to alternating mode after 20 mins.

What to buy with Protekt Aire Pump

Also available (sold separately)

How to activate Proactive Protekt Pump Unit?

  • Position the Control Unit by hanging hooks over the footboard of the bed or place the unit on the floor under the bed.
  • Attach the air hoses through the quick connector to the Control Unit. Ensure air hoses do not kink between the mattress, bed frame, and Pump Unit.
  • Plug the power cord into an electrical outlet with grounded AC power.
    Note: Before inserting the plug into the outlet, make sure the voltage is compatible. Also, make sure this product is well-grounded.
  • Switch the power button on. Allow up to 40 minutes for full inflation.
  • Once ready, the indicator of the power key will remain on - lay the patient on the bed and select the appropriate comfort level.

Perform a “bottom out” test to ensure that patient is properly suspended. Slide your hand under the top cover along a deflated cell in the sacral (bottom) area. Secure sheets loosely enough to ensure they do not interfere with cell alternation.

How to clean Protekt Aire 4000 Digital Pump?

  • It can be cleaned with a disinfectant solution
  • Do not immerse the pump in water
  • Do not heat or steam in the autoclave


Description Specification
Power supply:  110V/60Hz, 1A
Air output:  =7 liter/min.
Pressure range:  30mmHg – 80mmHg
Cycle time:  10 min


18 Months Warranty

Customer Reviews


{{x.ShortDescription}} ...


Please enter your and your friends email address below.

Fields marked with * are compulsory

Your Name*
Your Email Address
Friend's Name*
Friend's Email Address
The selected product information along with Reward Dollar coupon code has been successfully emailed to you and your friend.

Thank you for using