Pride Mobility Outlander XL External Lift
Pride Mobility Outlander XL External Lift

Pride Mobility Outlander XL External Lift

Brand/Manufacturer: PRIDE MOBILITY

Pride Mobility Outlander XL External Lift is a two-rail scooter lift specifically designed for larger 4-wheel scooters. The extra-large rails and integrated automatic scooter lockdown arm are designed to provide a secure self-locking mechanism for compatible 4-wheel scooters. The simple hitched-based installation requires little to no modification to your vehicle or mobility device and allows for easy removal. The drive-on/drive-off platform enables loading from either end of the lift and takes the hassle out of loading the mobility scooter in a busy parking area.

Please provide Vehicle Information (Hitch to Ground Height, Vehicle Make, Vehicle Model, Vehicle Year and Make/Model of Mobility Device) at the time of ordering.

Buy this product and earn 99.95 Reward Dollars.


  • Lift
  • Hitch Type
  • Securement Device
  • Power Supply
  • Total: $2899
    Total: $1999
Total: $2899
Total: $1999


  • Pride Mobility Outlander XL External Lift is compatible with Class III or IV hitches
  • Integrated scooter lockdown arm
  • Puddle light for ease of use at night
  • Toggle switch for ease of up and down use
  • Drive on/Drive off
  • Integrated license plate bracket
  • Phosphate undercoating for weather resistance
  • LED indicator for On/Off
  • Manual override
  • Intended Use: To aid in the transport of products that provide mobility to persons limited to a seated position that has the capability of operating a mobility device
  • Click Here for Owners Manual

More Information

  • Warning:
    - Adding accessories, oversized batteries, or a different seat will increase the weight of your mobility device. Verify with your authorized Pride Provider that the total weight of your mobility device, including additions, does not exceed the maximum hitch allowance
    - Before drilling or cutting into the vehicle, make absolutely certain through visual inspection that there are no obstructions, such as the fuel tank, exhaust pipes, or electrical wires, in the path of the drill bit
    - Be sure your vehicle is parked on flat, level ground before attempting to load, lift, or remove a mobility device with the lift system. Make sure the vehicle emergency park brake is engaged before loading or unloading a mobility device
    - Never exceed the maximum lifting capacity of a lift regardless of the class of hitch being used. Doing so may cause lift and/or vehicle damage
    - Before installing the lift and applicable hitch systems, check your vehicle owner manual for hitch maximum tongue weight capacity. Do not exceed the maximum tongue weight capacity of your vehicle
  • Care and Maintenance:
    Daily Maintenance Schedule:
    This lift system may come equipped with any of the securement devices listed below. Inspect these devices for loose or damaged parts on a daily basis. Have your authorized Pride Provider repair or replace any problem parts before using the lift system
    - Retractable Tie-down straps
    - Scooter lock-down arm
    - Power chair hold-down bar
    90-Day Maintenance Schedule:
    - Clean and lubricate the T-bar inner telescoping tube. Use only all-weather lithium grease
    -Lubricate all pivot points on the lift. Use only all-weather lithium grease
    -Inspect and clean the power-supply connections as necessary
    - Inspect all hardware and tighten or replace as necessary
    - Visually inspect lift system for loose or damaged parts. Have your authorized Pride Provider repair or replace any problem parts before using the lift system
    General Cleaning Guidelines: The lift system can be hand washed along with the vehicle with soap and water. However, automatic drive-through car washes should be avoided as they may interfere with and cause damage to the lift
    Wiring Harness: Should be checked periodically for corrosion and/or decay. Contact your authorized Pride Provider if the wiring harness needs to be replaced
    Lift Removal:
    - Raise platform to stowed position
    - Disconnect power source
    - Lubricate hitch mount bolt with WD-40 prior to removal


Base Weight94 lbs
Maximum Mobility Product Overall Weight350 lbs
Maximum Mobility Product Width27"
Overall Platform Length56.75", 49" usable
Maximum Travel Distance From the Ground21"
MotorSealed 12 volt DC
Hitch ClassIII & IV
Vehicle PlatformFull-size van, Minivan, Truck, Sedan, SUV and Crossover


Customer Reviews

Questions & Answers


Enter your Answer below.

Security Question: + =
question image
ItemName - now

Your question will show here once it will get approved.
answer image
UserName - now
Your Answer will show here once it will get approved.
Please enter your and your friends email address below.
Fields marked with * are compulsory

The selected product information has been successfully emailed to your friend.

Thank you for using