Invacare Reliant Linak Battery Kit
Invacare Reliant Linak Battery Kit

Invacare Reliant Linak Battery Kit

Authorized Retailer Badge

Invacare Reliant Linak Battery Kit is packed up with all the charging essentials needed for Invacare Reliant Patient Lifts in one package. Reliant Linak Battery Pack is a 24-volt quick-release battery which eliminates downtime. Anti-entrapment feature stops motion in case boom meets resistance while lowering. It beeps when the battery needs to be recharged. Using an integrated snap system, the battery pack can easily be exchanged or mounted on the charger and/or the control box using Linak mounting brackets.

Shipping Charges Applicable

Item #DescPkgRewardPrice 
INVACARE LINAK KIT Charging Station Kit Each $3.40

Invacare Reliant Linak Battery Kit


  • Battery Pack
  • Charger
  • Power Cord
  • Wall Mount Bracket

Key Features:

  • High battery capacity: 24 V DC , 1 x 2.9 Ah
  • Linak Battery gives 40 lifts and lowering for the system with a fully charged battery under the following conditions:
    - Normal speed
    - Stroke: S = 200 mm
    - Thrust up to: 6000 N
    - Actuator does not reach the end position at any time
  • Input: 100V-240V AC
  • Output:29.5V DC
  • Charging Time: Max. 6 hrs.
  • Duty cycle: 10% or 2 min, continuous use then 18 min, not in use
  • Protection class: IPX5, only when mounted vertically
  • Ambient temperatures: +5° to +40 °C
  • UL listed and CSA certified

More On Reliant Linak Battery Kit

Replacing the Battery:

  • Scale is powered by a nine-volt alkaline battery that provides approximately 1500 readings before needing a replacement
  • When a battery replacement is needed, LO BAT will appear on the display
  • Slide the battery door open in the direction of the arrow
  • Remove the existing battery
  • Install the new battery
  • Reinstall the battery door

How to Charge Linak Battery?

How to Charge Linak Battery1. Lift up on the handle on the back of the battery.
2. Lift the battery up and out away from the control box.
3. Place the battery on the battery charger as shown. Make sure there is an audible click.
4. Lift up on the handle on the back of the battery.
5. Lift the battery up and out away from the battery charger.
6. Reinstall the battery onto the control box as shown. Make sure there is an audible click.

Things To Keep In Mind While Charging:

  • Invacare recommends the battery be recharged daily to prolong battery life.
  • An audible alarm will sound (horn will beep) when battery is low.
  • Make sure there is an audible click when mounting battery on the battery charger to confirm proper mounting. Otherwise, injury or damage may occur.
  • The charge LED will illuminate. When charging is complete, charge LED will stop illuminating.
  • A battery needing to be fully recharged will take approximately four hours.

Customer Reviews

Questions & Answers

question image
How do I know that battery needs to be charged?
JACK - 4/27/2017 7:52:23 AM
answer image
Reliant Linak Battery beeps when it needs to be recharged.
Customer Care - 4/28/2017 2:30:34 AM
question image
For how much time should the battery be charged?
NANCY - 4/27/2017 7:51:43 AM
answer image
Invacare Linak Battery should be charged maximum for 6 hrs.
Customer Care - 4/28/2017 2:31:08 AM
question image
Is this compatible with hoyer model number RPL450-2?
Kelly - 12/9/2016 8:34:51 AM
answer image
Yes, Invacare Reliant Linak Battery Charging Station is compatible with model number RPL450-2.
Customer Care - 12/9/2016 12:35:58 PM
Please enter your and your friends email address below.
Fields marked with * are compulsory

The selected product information has been successfully emailed to your friend.

Thank you for using