Invacare microAIR Lateral Rotation Mattress
Invacare microAIR Lateral Rotation Mattress

Invacare microAIR Lateral Rotation Mattress

Brand/Manufacturer: INVACARE CORPORATION
Save
Authorized Retailer Badge
  • HyGiene Products
  • Non Returnable

Invacare microAIR Lateral Rotation Mattress allows for customizable turn times and rotation angles in a patented z-cell design for a comfortable and subtle turn for the user as they move from side to side. It features a powerful blower that offers greater air output, efficient therapy cycles, and quick set-up. There are enhanced protective measures such as side bolsters and recentering of the patient in between turns. The MA95Z aids in the prevention and treatment of stage I to IV pressure ulcers.

Item #DescPkgRewardPrice 
MA95Z 80"L x 36"W x 10"H Each $108.00
$6599.99
$5399.99

Features

  • Invacare microAIR Lateral Rotation Mattress features wireless auto fowler which when activated, 25% more air is automatically pushed into the mattress to prevent user from bottoming out when bed back is raised
  • Must be installed on medical bed frames with side rails. The side rails must be in the raised position whenever a patient is on the bed
  • Automatically recenters user in between turns
  • Audio and visual alarms signal when air pressure is low or during a power outage
  • 10" Air bladders for increased immersion
  • Dual-layered, quilted cover is fluid resistant and vapor permeable
  • Static and pulse therapies are available in addition to the alternating lateral rotation and continuous true low air loss
  • Enhanced protective measures such as side bolsters and recentering of the patient in between turns are added
  • Aids in the prevention and treatment of stage I to IV pressure ulcers
  • 24 air cells and built-in raised side bolsters
  • Urethane four-way stretch quilted cover, denier nylon bottom
  • Power outage safety remains inflated through power outage
  • Blower: 1,275 LPM
  • Weight Capacity: 350 lb
  • Click Here For User Manual
  • Click Here For Maintenance Manual

More Information

  • Waning
    - Patient entrapment with bed side rails may cause injury or death
    - Mattress must fit bed frame and side rails snugly to prevent patient entrapment
    - Always consult the patients physician before using the MA95Z systems
    - The MA95Z series (including bariatric) is recommended to be installed on medical bed frames with bed side or assist rails
    - It is preferred that the rails be in the raised position whenever a patient is on the bed
    - Health care professionals assigned to each case should make the final determination whether side or assist rails are warranted after assessing patient risks of entrapment and falls in accordance with State patient restraint legislation or facility interpretation of such legislation
  • Danger
    - Do not smoke while using this device. This system uses room air for circulation through the mattress. A cigarette can burn a hole in the bed surface and cause damage to the mattress
    - Also, patient clothing, bed sheets, etc. may be combustible and cause a fire. Failure to observe this warning can result in severe fire, property damage and cause physical injury or death
    - Smoking by visitors in the room will contaminate the system. Therefore, visitor smoking is Not permitted
    - Electrical shock hazard
    - DO NOT remove cover
    - Refer to qualified service personnel. Before performing any maintenance to the power unit, disconnect the power cord from the wall outlet
    - DO NOT insert items into any openings of the control unit. Doing so may cause fire or electric shock by shorting the internal components The control unit must be kept away from all heat sources and radiators during operation
    - Connect the equipment to properly grounded three prong wall outlet using 10-14 ft hospital grade power cord provided with the product. Grounding reliability depends upon a properly grounded receptacle (3-prong)
  • Connecting the Hose
    - Locate the hose at the foot end of the mattress
    - Locate the control unit connector on the right side of the control unit
    - Perform one of the following
    • Lift and hold the connector cover up
    • Push the hose connector onto the control connector
    • Ensure the hose connector is flush with the control unit connector

Specification

ItemDimension
Electrical Power90V, 60Hz, 1A
Power Unit14.5" x 11" x 6"
Power Cord14ft
Air Cells70 denier urethane coated nylon
Weight Capacity350lbs on standard mattress size and 1000lbs on bariatrics
Flammability16 CFR 1632 and 16 CFR 1633 , TB129 and ASTM 1590 compliant

Warranty

  • 1 year limited warranty on mattress and cover
  • 2 year limited warranty on power unit

Customer Reviews

Questions & Answers


 
 

Enter your Answer below.

Security Question: + =
question image
ItemQuestion
ItemName - now

Your question will show here once it will get approved.
answer image
UserAnswer
UserName - now
Your Answer will show here once it will get approved.
Please enter your and your friends email address below.
Fields marked with * are compulsory
 
*
*
*
*

 
SubmitCancel
The selected product information has been successfully emailed to your friend.

Thank you for using www.healthproductsforyou.com

Close