Invacare CareGuard Alternating Pressure Pad And Pump
Invacare CareGuard Alternating Pressure Pad And Pump

Invacare CareGuard Alternating Pressure Pad And Pump

Brand/Manufacturer: INVACARE CORPORATION
Save
Authorized Retailer Badge
  • HyGiene Products
  • Non Returnable
  • Latex Free

Invacare CareGuard Alternating Pressure Pad And Pump is a specially designed therapeutic support surface used to aid in the prevention and treatment of pressure ulcers for those who may be at-risk. Pump alternately inflates and deflates air cells. Multiple pressure settings on an easy-to-use pump provides custom user comfort.

Item #DescPkgRewardPrice 
CG9701 Alternating Pressure Pad and Pump Each $2.20
$199.99
$109.99

CareGuard Alternating Pressure Pad And Pump

  • Designed to be placed on top of an existing mattress
  • Variable pressure setting for added patient comfort
  • Easy to use and maintain
  • Built-in bracket allows for pump to be easily mounted on bed
  • Durable flaps on pad wrap underneath mattress for increased stability
  • Does not contain latex
  • Pad can be cleaned by wiping it with a germicidal disinfectant solution
  • Maximum weight capacity: 250 lbs
  • Dimensions:80" L x 34" W x 2.5" H
  • Note:
    - This item cannot be returned or exchanged once they are opened due to hygienic reasons
  • Click Here For User Manual

More On CareGuard Alternating Pressure Pad And Pump

Installing the Alternating Pressure Pump:

  1. Perform one of the following:
    • Place the Invacare APP Alternating Pressure Pump on a flat surface near the bed.
    • Open the hooks on the back of the Invacare APP Alternating Pressure Pump and install on the outside of the bed frame.

    • Installing the Alternating Pressure Pump

  2. Place pad on top of bed mattress.
  3. Install end flaps over mattress corners to secure pad.
  4. Connect the other end of air hoses to the pump.

  5. Installing the Alternating Pressure Pump

  6. Connect air hoses with fittings to the air chamber openings on the pad.
  7. Install sheet over pad and bed mattress.
  8. Use the pump.

Using the Pump:

  1. Plug power cord into outlet.
  2. Turn power switch to the On position.
  3. Turn knob on pump to the maximum setting (clockwise).
  4. Adjust the pump.

Adjusting the Pump:

  1. Put the patient on the pad.
  2. Set the pressure to the desired setting by performing one of the following:
    • Increase Pressure - Turn the knob to the right.
    • Decrease Pressure - Turn the knob to the left.
  3. Slide the flat portion of your hand between the pad and the mattress.
  4. If pressure is unacceptable for the patient, repeat Step 2 until the desired pressure is reached.

Warranty

30 days warranty on pad

Customer Reviews

Questions & Answers


 
 

Enter your Answer below.

Security Question: + =
question image
ItemQuestion
ItemName - now

Your question will show here once it will get approved.
answer image
UserAnswer
UserName - now
Your Answer will show here once it will get approved.
question image
Can this mattress be wiped down with a damp cloth?
Lena Evins - 2/18/2017 11:01:31 AM
facebooktwittergplus
answer image
The Alternating Pressure Pad can be cleaned by wiping it with a germicidal disinfectant solution.
Customer Care - 2/19/2017 11:19:00 PM
Please enter your and your friends email address below.
Fields marked with * are compulsory
 
*
*
*
*

 
SubmitCancel
The selected product information has been successfully emailed to your friend.

Thank you for using www.healthproductsforyou.com

Close