Columbia Ultima Access Stainless Steel Bath Chair

More About Ultima Access Bath Chair

Assembly Of Chair: Ultima Access Bath Chair

• Back angle adjustment pull handle U-shaped back support frame Insertion point for back frame
• Back angle adjustment pull tab
• U-shaped calf support frame
• Calf angle adjustment pull handle, straight calf panel.
• Leg frame, can be positioned at 0 degree, 30 degrees, 60 degrees angle, relative to horizontal plane of seat
• Leg frame adjustment pull handle.

Assembling the Back Support:

• One by one, pull on each of the pull tabs and change the pivot angle to vertical.
• Insert the U-shaped stainless steel back and calf frames into the pivots and fasten with bolts and nuts provided.
• Insert the ends of the angle adjustment pull handles into the small holes located on the pull tab on each side of the frame.

Cleaning Instructions: Ultima Access Bath Chair

• Soapy water or mild cleansers may be used on all parts of your Ultima Access Bath Chair.
• Harsh abrasive cleansers may dull the finish.

Fabric Care:

• The fabric cover for Ultima Access Bath Chair is made of polyester that is durable, antimicrobial, resilient, quick drying, fade resistant, and machine washable.

Cleaning Instructions:

• Remove the chair cover by following these steps below:
  - Adjust the back and calf support frames to horizontal. Turn the chair up-side down and remove the hook and loop strap.
  - Slip the cover over the back and calf supports.
  - Using warm water (100°F/38°C) and household laundry detergent, wash the cover in the washing machine using gentle cycle.
  - Air dry.

Specification

Warranty

Customer Reviews