Bard Bardex Lubricath Two-Way Hematuria Foley Catheter – Long Round Tip
Bard Bardex Lubricath Two-Way Hematuria Foley Catheter – Long Round Tip

Bard Bardex Lubricath Two-Way Hematuria Foley Catheter – Long Round Tip

Brand/Manufacturer: BARD INC

Bard Bardex Lubricath Two-Way Hematuria Foley Catheter is used for post-turp hemostasis. The shaft of the catheter is reinforced with a wound nylon coil that offers significant resistance to collapse under the vacuum of irrigation. The additional strength of the coils assures users that any blockage can be cleared by irrigation. 

Lubricath Two-Way Hematuria Foley Catheter Highlights:

  • Single use
  • Sterile 
  • Latex 
  • Long round tip 
  • 30cc balloon capacity
  • Two Sets of Opposing Drainage Eyes

Item #DescPkgPrice 
2550H22 22FR Each $64.35 $35.99
2550H22 22FR 5/Case $285.65 $163.99

Lubricath Two-Way Hematuria Foley Catheter Benefits

  • Shaft of the latex foley catheter is reinforced with a spiral cord to resist collapse during aspiration
  • Coils add resistance to any collapse from the pressure of inflation
  • Bard Bardex Lubricath Two-Way Hematuria Latex Foley Catheter With 30cc Balloon Capacity has a reinforced tip to accommodate a stylet
  • Lubricath permanent hydrophilic coating facilitates insertion and removal and helps to reduce encrustation on the inner and outer catheter surfaces

Inflation/Deflation Guidelines

  • Catheter Inflation:
    - Ensure that the Bard Foley catheter balloon is positioned well within the patients bladder. Slowly, with a gentle, constant force, inflate the Bard Foley catheter balloon with the volume prescribed on the package
    - Note that the 5cc balloon must be inflated with between 9cc to 10cc of sterile water
    - Improperly inflated Bard Foley catheter balloons may cause drainage and deflation difficulties
    - Using fluid other than sterile water may cause the balloon not to empty properly, especially after long dwell times

  • Catheter Deflation:
    - Select a luer slip syringe
    - Slide the plunger of the syringe up and down the barrel of the syringe several times to loosen it up
    - Compress the plunger all the way and then pull back the plunger slightly so that it does not adhere to the front of the syringe barrel
    - Gently insert the syringe in the catheter valve
    - Do not use more force than is required to make the syringe stick in the valve
    - Allow the pressure within the balloon to force the plunger back and fill the syringe with water
    - If you notice slow or no deflation, re-seat the syringe gently. Once again, allow the balloon to deflate slowly on its own
    - If the balloon does not deflate, reposition the patient.
    - Ensure that the catheter is not in traction, the proximal end of the catheter is not compressed within the bladder neck
    - Ensure that urine flows freely
    - Attempt to deflate the balloon by using the pressure in the balloon to force water into the syringe as described above
    - If the balloon stills fails to deflate, apply very gentle slow aspiration. Aspiration that is too rapid, or too forceful, may cause the inflation lumen within the Foley catheter to collapse
    - If permitted by hospital protocol, the valve arm may be severed
    - If this fails, contact an adequately trained professional for assistance, as directed by hospital protocol


Catheter TipRound Tip
Catheter MaterialLatex



Catheter CoatingHydrophilic
Catheter Tip LengthLong
Catheter StyleCoated Catheters

Catheter French Size


Ballon Size (CC)


Drainage EyesTwo Sets Of Opposing Drainage Eyes

Customer Reviews

Questions & Answers

Please enter your and your friends email address below.
Fields marked with * are compulsory

The selected product information has been successfully emailed to your friend.

Thank you for using