Anderson Waterhog Eco Floor Mat
Anderson Waterhog Eco Floor Mat

Anderson Waterhog Eco Floor Mat

Brand/Manufacturer: THE ANDERSEN CO
Save

Anderson Waterhog Eco Floor Mat combines renowned Waterhog bi-level construction with the most environment friendly construction ever. It is made with 100 percent post-consumer recycled PET Polyester fiber derived from used plastic bottles for the face and a 100 percent rubber backing that contains 15 percent to 20 percent post-consumer recycled tires.

Buy this product and earn 3 Reward Dollars.

  • ORDERING DETAILS
  • Color
  • Size
  • Total: $450.6
    Total: $299.9
Total: $450.6
Total: $299.9

Features

For product dimensions and other specifications please select Specification Tab

  • Anderson Waterhog Eco Premier mat comes with a rubber water dam border and Waterhog Eco Premier Fashion mat with a matching fabric border
  • Dries quickly and won’t fade. When wet, the rubber-reinforced surface allows water to be wicked to the bottom of the mat away from foot traffic while providing a slip-resistant surface
  • Not adversely effected by salt or ice melt
  • Passes Flammability Standard DOC-FF-1-70
  • Not recommended for use in areas exposed to grease or petroleum products
  • Heavy-durable commercial face fabric suitable for indoor or outdoor use
  • Every 3 x 5 diverts approximately 60 plastic bottles from landfills

More Information

  • Exclusive rubber-reinforced face NUBS:
    - Face NUBS are reinforced with rubber to resist crushing, maintaining high performance and extending product life
  • "Water Dam" border:
    - Border is designed to hold water and dirt on mat to minimize slip hazards and floor damage around perimeter of the mat
  • Raised NUB surface:
    - Unique ridged construction effectively removes and traps dirt and moisture and holds it on mat below shoe level so it is not tracked in
  • TriGrip backing:
    - Gripping action minimizes movement on most carpets and improves traction on hard surfaces
  • Rubber backing:
    - Lays flat, won’t crack or curl like vinyl mats
  • Easy to clean:
    -Just vacuum or hose off and hang to dry
  • Colorfast:
    - Solution dyed for excellent light and wet fastness

Maintenance Recommendations for Anderson Mats:

  • Vacuum Daily:
    -When possible, Waterhog mats should be vacuumed on a daily basis. During periods of inclement weather, use of a wet/dry vacuum may provide a more effective method of daily maintenance
  • Routine Maintenance:
    -Spots and non-permanent stains should be removed as needed using a safe non-organic solvent based cleaner. In the event a solvent based spotter is needed, caution should be taken to rinse the excess solvent thoroughly before returning the mat to service. Failure to rinse the solvent can result in damage to the rubber backing of the mat. Periodically, as needed, Waterhog mats should be cleaned using a more vigorous method such as a pressure washer or water hose. Following the use of this method, the mats should be placed in a position to allow them to drain. This draining will occur rapidly and the mats will be ready to put back into service in a short time
  • Deep Cleaning:
    -Waterhog mats may be cleaned by any routine method used for carpeted floors. This includes wet extraction as well as low moisture extraction methods. Chemicals used for cleaning should be as solvent-free as possible and following a wet cleaning, care should be taken to rinse the mat as thoroughly as possible. If a wet system is used, the mats should be placed in a position to drain as much as possible before returning to service
  • Floor Preparation:
    -Prior to the mat being put back into service, Andersen recommends that the floor where the mat will be placed be cleaned to remove dust and dirt. This will allow the mat to grip the floor more effectively reducing mat movement with traffic

Specification

Particulars

Dimensions

Face

Molded reinforced textile

Fiber

100% Solution-dyed PET fabric recycled from plastic bottles

Pile/Nub Height

3/8”

Design

Diamond

Face Weight

30oz

Backing

100% SBR rubber (15-20% recycled rubber from tires)

Backing Thickness (Border)

0.160"

Backing Thickness (Nubs)

0.190"

Backing Thickness (Between Nubs)

050"

Backing Durometer

60

Backing Tensil

600 PSI

Customer Reviews

Questions & Answers


 
 
Please enter your and your friends email address below.
Fields marked with * are compulsory
 
*
*
*
*

 
SubmitCancel
The selected product information has been successfully emailed to your friend.

Thank you for using www.healthproductsforyou.com

Close