Med-Lift 1175 Two-Way Reclining Lift Chair
Med-Lift 1175 Two-Way Reclining Lift Chair

Med-Lift 1175 Two-Way Reclining Lift Chair

Brand/Manufacturer: MED-LIFT & MOBILITY INC.
Authorized Retailer Badge
  • Made in USA

Med-Lift 1175 Two-Way Reclining Lift Chair has a contemporary look with a waterfall backrest and comes with a magazine pocket on right side. It features 2 position Vibrating Massage and Heat and is designed with a 325 lbs weight capacity. Recommended height range of 1175 Lift Chair is 5 feet 4 inches to 6 feet. Extra padding makes the arms, arm fronts, backs, etc. feel softer and more plush.

Buy this product and earn 47.45 Reward Dollars.

Cannot be shipped Rush or Expedited delivery.

  • Color
    View Color Swatches
  • Recline Position
  • Optional Accessories
  • Delivery Option
  • Total: $1265
    Total: $949
Total: $1265
Total: $949

Give me a Better Price

Med-Lift 1175 Lift Chair Features

  • Fiber filled back
  • Low volt quiet motor
  • Special locking T-Nuts to ensure that the mechanism stays tight throughout the lifetime of the chair
  • All joints are glued and connected with steel fasteners
  • 5 No-sag seat springs
  • All fabrics used on any Med-Lift chair meets both CAL 117 and UFAC requirements for flammability
  • All bolts used are Grade 5
  • Fabric is surrounded by an extra layer of foam or micro-foam to ensure a long fabric life
  • Acella-Flex foam seating
  • Weight Capacity: 325 lbs
  • Construction material:
    - Fiber - 5%
    - Foam - 10%
    - Fabric - 10%
    - Steel - 30%
    - Fasteners and miscellaneous - 5%

More About Med-Lift 1175 Lift Chair

Chair Frame:

  • The frame of the chair is all kiln-dried hardwood
  • All stress points are kiln-dried oak
  • All joints are glued and connected with steel fasteners
  • Uni-construction of seat-back assembly is independently lab-tested for strength and durability
  • Gang nails are used at all other critical joints or stress points. All bolts used are top quality grade 5
  • All bolts go entirely through the wood. No lag screws are used to secure the mechanism
  • The mechanism is secured by special locking T-Nuts to ensure that the mechanism stays tight throughout the lifetime of the chair
  • All critical connection points for reclining hardware, etc., have a double locking nut, which is aircraft grade quality
  • All wood screws used are the best and strongest available
  • Corner blocks are used throughout the chair at all critical points for added strength
  • An extra rail is used across the top of the seat back to help keep the back straight and square

Seat Spring:

  • All seat springs used are 9 gauge Morley system no-sag springs that are tied together with tie wire to make every spring work together as a seat unit
  • Seat spring are correctly spaced on the spring rails by a special clip rail machine
  • The front seat rail on the frame is larger and thicker than most competitors;, thus making it much stronger and durable
  • There is a retainer rail secured by steel brads on top of the seat springs to make sure that they do not come loose
  • The back springs used are 12 gauge, and these are also tied together with special tie wire for more comfort and endurance
  • To ensure that the seat springs do not cut into the bottom of the seat foam, a nova bond pad is used as well

Acella-Flex Foam Seating:

  • Developed by Leggett and Platt is the only foam used
  • It offers the closest thing to a "perfect seating configuration" that is available in the industry
  • Acella-Flex basically pushes back 1 pound for every pound of weight that is exerted against it. This characteristic makes the chairs, basically, sit the same for a person of 90 lbs. as for a person of 300 lbs
  • Acella-Flex will keep 99.9% of its original shape and size. Most conventional foam will shrink 10-15% in size over the first couple of years
  • Med-Lift uses a special break-in process before the foam is ever cut to make the foam feel good from the first use forward
  • As an added benefit to foam,  a super soft layer is glued on top of the Acella-Flex which gives a very nice feel to the seat, while still giving the user the Acella-Flex base for strength and long life

Lift Base:

  • The foundation of the chair is the lift base
  • After testing all the lift bases, it is determined that the Super Sagless lift base (made in the USA) is the best available
  • While more expensive, it will withstand constant use and abuse of a lift chair
  • A lift base must be as wide as the base of the chair
  • Super Sagless base used is the most stable base in the upright lifted position


  • All fabrics used on all Med-Lift chairs meet both CAL 117 and UFAC requirements of flammability
  • Fabrics, foam and fibers once a year are tested in order to ensure that they meet correct specifications


 Options: 1175 ( 2 Way)
Overall Width31.5"
Overall Depth41"
Overall Height41.5"
Overall Reclined Length60"
Front of ottoman to Back of Seat37"
Seat Width between arms21"
Seat Depth19.5"
From Seat to Top of Arm6"
Seat Height from Floor19"
Back height from Seat25"
Ottoman Height from Floor19"


2 year warranty on all components

Customer Reviews

Questions & Answers


Enter your Answer below.

Security Question: + =
question image
ItemName - now

Your question will show here once it will get approved.
answer image
UserName - now
Your Answer will show here once it will get approved.
question image
Does the vibration mode automatically go off after a period of time?

If so, how long??
Jay - 4/1/2017 10:19:51 AM
answer image
Heat & Massage Only by  Hand Control 
Press PWR to turn On or Off. 
15 Minute Timer: Single Press (GREEN) 
30 Minute Timer: Press & Hold (ORANGE) 
Press LO or HI to turn HEAT ON or OFF. 
Independent 30 Minute Timer. 
Press any or all ZONE keys to turn any ZONE On or Off. 
Press SELECT, WAVE, or PULSE for desired operating mode. 
Press – (Left) to decrease or + (Right) to increase INTENSITY and SPEED.
Customer Care - 4/8/2017 4:42:29 AM
Please enter your and your friends email address below.
Fields marked with * are compulsory

The selected product information has been successfully emailed to your friend.

Thank you for using