MTS Transfer Handle for Hospital Style Beds

Why choose MTS Transfer Handle for Hospital Beds?

• Available in two models- spring based or pan based hospital beds
• Spring bed model includes a bed board that sits on top of the springs
• The pan bed model attaches directly to the metal bed frame
• Handle meets federal entanglement safety guidelines
• Extra cross bar for grabbing and stability
• Handle easily removes in case of emergency
• Handle meets federal bed safety guidelines
• Easy to install, no tools required
• 250 lb capacity 
• Made in the USA

What to buy with MTS Transfer Handle

• MTS SafetySure StandEase
• MTS SafetySure Bed Pull-Up
• MTS SafetySure SafeGuard Cover

How to install MTS Transfer Handle?

• For Spring Based Installation Instructions:
  • Place handle support board in position just above the pivot point of the head of the bed.
  • Secure the discs with knobs from the underside of the bed springs.
  • Install handle into receiving tubes making sure snap buttons lock in place.
• For Pan Style Installation Instructions:
  • When clamping to bed make sure Z Clip captures the downward leg of the bed pan surface.
    Note: Model 6025H uses a J Hook on the non handle side to secure the unit to the bed.
  • Position unit just above the hinge on the upper portion of the bed. This is the hinge that allows the bed to ratchet up and down. Important: Do not overlap this hinge with the mounting base. This will prevent the bed from ratcheting up and down.
  • When attaching second side, insert center tube (D) into both of the square tubes.
  • When both sides are positioned properly tighten five star knobs. These knobs should be tightened securely so the unit has no slippage. Re-check tightness periodically.
  • Insert handle into receiving tubes allowing snap buttons to lock into position.

• Do Not Use this product or any available optional equipment without first completely reading & understanding these instructions before attempting to use this equipment otherwise, injury or damage may occur.
• The Transfer Handle is not intended to prevent an individual from inadvertently rolling out of bed.
• Do Not Use for confinement or restraint purposes. DO NOT use to transport or move bed.
• Entrapment May Occur. Proper patient assessment and monitoring, and proper maintenance and use of equipment is required to reduce the risk of entrapment. Variations in mattress thickness, size or density could increase the risk of entrapment. Remove bed rails and all bed rail mounting brackets prior to installation of the Transfer Handle.
• Although the Transfer Handle model is rated for such use, it may become deformed or broken if excessive force is exerted on the device. The installation should be checked and rechecked periodically for safety.
• After installation, verify the mattress is in firm contact with the Transfer Handle.
• Check that the mattress cannot shift away, immediately discontinue use if this occurs until the situation is corrected.
• The Transfer Handle is designed to accommodate a range of different bed manufacturers. If the device does not easily attach to the bed per the instructions or interferes with the sub-frame, or the mattress does not firmly make contact with the Transfer Handle – Do Not Use.