Pari Vios LC Plus Pediatric Aerosol Nebulizer Compressor

Why choose Pari Vios LC Plus Pediatric Nebulizer Compressor?

• Vios gives confidence that patients will receive an effective treatment dose
• Vios treatments are fast and efficient
• Easy to use and activate and great for patient reminder programs
• Engineered with a powerful motor its treatment time is under 5 minutes
• Breath-enhanced nebulizer design saves money by wasting less medication
• Consistent particle size with targeted medication delivery to the lungs
• Helps reduce bacterial contamination

Pari Vios LC Pediatric Compressor Nebulizer Parts

Vios Aerosol Nebulizer Guides

• Pari Vios LC Plus Pediatric Aerosol Nebulizer Compressor User Manual
• Nebulizer Compatibility Guide

What to buy with Pari Aerosol Nebulizer Compressor

• Pari Long Lasting Air Filter For Pari Nebulizer Systems
• Pari LC Sprint Reusable Nebulizer
• Pari Baby Aerosol Masks

How to Setup Pari Vios Nebulizer Compressor?

1. Clean/Disinfect Nebulizer Cup: Properly clean and disinfect your nebulizer prior to first use. Re-assemble nebulizer.
2. Set-up Compressor: Place the compressor on a flat, stable surface free of dust. Avoid cushioned, upholstered, or carpeted surfaces. Make sure the power switch is turned, in the "Off" position. Plug the power cord into a wall outlet.
3. Connect Tubing To Compressor: Insert one end of Wing Tip tubing into the air outlet on the compressor. It should fit snugly.
4. Load Medication: Open the inspiratory valve cap of the nebulizer by lifting the cap. Pour the prescribed dose of medication into the nebulizer cup. Never fill past the max. Fill a line of 8 ml.
5. Attach Mouthpiece or Mask: If using the mouthpiece, attach the mouthpiece to the nebulizer outlet with the expiratory valve facing up. Then close the inspiratory valve cap by pressing firmly on the nebulizer top. If using the Bubbles in the Fish II Pediatric Mask provided with the unit, attach the mask directly to the nebulizer outlet. If using another type of mask refer to the mask instructions.
6. Attach Tubing To Nebulizer Cup: Firmly press the other end of the Wing Tip tubing to the bottom of the Pari reusable nebulizer
7. Starting Treatment: Sit in a relaxed, upright position and turn the compressor "On"
8. Nebulizer Position: Place the mouthpiece on top of the tongue and close the lips around it. Take slow, deep breaths. As you inhale, the inhalation valve opens.
9. Breathing: For the mouthpiece, inhale and exhale slowly through your mouth. As you exhale, the valve on the mouthpiece opens to allow the exhaled mist to escape. For the mask, place the mask over the nose and mouth and inhale and exhale slowly.
10. Complete Treatment: Continue until the medication is gone or you hear a slight "sputtering" sound. Turn compressor "Off"

How to clean Pari Vios Pediatric Nebulizer?

1. Disconnect the tubing from the air intake on the bottom of the nebulizer cup.
2. If there is any moisture (condensation) in the tubing, let the compressor run with only the tubing attached for 2-3 minutes. The warm air from the compressor will dry out the tubing. Alternatively, you can dry the tubing by removing it from the compressor and hanging it up with the “ends down” to allow any moisture (condensation) to drain out and evaporate. Use a clean damp cloth to wipe the exterior of the tubing.
3. Disassemble Pari reusable nebulizer parts as illustrated on the page.
4. Wash all parts including the Bubbles II pediatric mask with warm water and liquid dish soap. Do not use the tubing.
5. Rinse the reusable nebulizer parts and Bubbles II pediatric mask thoroughly with warm water and shake out water.
6. Air dry or hand dry nebulizer parts on a clean, lint-free cloth. Reassemble the nebulizer when the parts are dry and store it.
7. You can also wash all parts of the reusable nebulizer on the top shelf of a dishwasher. Do not place Bubbles II pediatric mask in the dishwasher. Do not wash the tubing. Place the reusable nebulizer parts in a dishwasher basket, then place the basket on the top rack of the dishwasher. Remove and dry the parts when the dishwasher cycle is complete.

Warning:
To reduce the risk of infection:

1. Nebulizer for single patient use (one person) only. Do not share your nebulizer with other patients.
2. You must regularly disinfect or sterilize the pari nebulizer machine between treatments. Failure to do so could lead to serious or fatal illness.

How to disinfect Pari Reusable Nebulizer Parts?

• Clean the nebulizer as described in Section E. For low-level disinfection every other treatment day, soak all parts of the PARI Reusable Nebulizer (except tubing and mask) in a solution of 1 part distilled white vinegar and 3 parts hot tap water for 1 hour. You can substitute respiratory equipment disinfectant (like Control III) for distilled white vinegar (follow the manufacturer’s instructions for mixing).
• Rinse all parts of the PARI Reusable Nebulizer thoroughly with warm tap water and dry with a clean, lint-free cloth. Discard the vinegar solution when disinfection is complete.
• The PARI Reusable Nebulizer parts (except tubing and mask) may also be disinfected by boiling them in a clean pot of water for a full 5 minutes.
• Hospitals and clinics can sterilize the PARI Reusable Nebulizer parts (except mask and tubing) by autoclaving (a maximum of 277° F or 136° C), following the autoclave manufacturer’s instructions.
• Dry parts on a clean, lint-free cloth.