Rolyan Hand-Based Anti-Spasticity Ball Splint

When to use Rolyan Anti Spasticity Ball Splint?

• To help prevent deformity in the presence of mild to moderate hypertonicity
• May be used following CVA, traumatic brain injury, and Parkinson's disease

What to buy with Anti-spasticity Hand Splint

• Rolyan Elbow Pre-Cut Splint
• Quick Freeze Cold Spray
• Rolyan Replacement Strap Kits For Individual Splints

How to use Rolyan Antispasticity Splint?

Modification

• Rolyan Splint, which is made from 1/4" (3.2mm) Polyform splinting material, can be modified for a better fit
• Heat the area to be modified using a heat gun or water that is heated to 150 degrees to 160 degrees F (65 degrees - 70 degrees C) for one minute or until pliable
• Heating the entire splint may cause it to lose its preformed shape
• Polyform has a high degree of drape - for better results when modifying the material, shape it with stroking movements
• Do not heat any of the splints near the rivet that holds the straps in place

Finger Strapping

• Strap the fingers as shown below

Wrist Strapping

• These splints include a padded Polyform wrist brace, which may be heated and molded to the hand
• Place it on the dorsal surface of the wrist with the longer edge placed distally and the padded side toward the skin
• Mold it to the wrist
• Position the wrist stabilizing strap, threaded through the padded brace, around the wrist

How to clean Rolyan Ball Anti Deformity Splint?

• The splint will lose its shape in temperatures over 135 degrees F (57 degrees C). It should be kept away from sources of heat such as ovens, hot water, open flames, and sunny car windows.
• The splint may be cleaned with soap and lukewarm water.
• The straps may be washed with soap and water, but the adhesive portion should not be moistened.
• The splint and straps should be allowed to dry thoroughly before reapplication of the splint.

Contraindications:

• Not in the presence of wrist or hand fractures
• Not for use over open wounds and infected areas
• Not for use with severe edema

Precautions:

• This splint is to be fitted initially by a healthcare professional who is familiar with the purpose for which they are prescribed. The healthcare professional is responsible for providing wearing instructions and precautions to other healthcare practitioners, care providers involved in the patient’s care, and the patient.
• If unusual swelling, skin discoloration, or discomfort occurs, use should be discontinued and a healthcare professional consulted.
• Be careful that the straps are not so tight that they interfere with circulation.
• After heating the splinting material, always check its temperature before applying it to the patient.