HealthCraft SuperPole FRS Assist Pole

HealthCraft SuperPole FRS Pole Features

• Effective support which required no ceiling attachment
• Easy to install:
  - Install the in-floor receptacles at each location where transfer support is required such as bathroom and bed-side applications (receptacle not included)
  - Can be placed into the installed floor receptacle and secured into the receptacle by turning the knob on top of the pole
• Comes in anti-microbial powder coat white gloss finish
• Pole size:
  - Total length: 57" (145cm)
  - Above floor-length: 53.25" (135cm)
  - Diameter: 1.5" (3.81cm)
• Grip material:
  - Grey, premium high quality, latex-free grip, 20" (51cm) long
• Weight capacity: 450lb (205kg)
• Also available (Separately):
  - HealthCraft SuperPole FRS Floor Receptalce (FRS-FR)

More On Floor Receptacle System

• Note: The SuperPole FRS should only be installed in concrete slab type floors of structurally sound design. We recommend that you have your SuperPole FRS installed by a qualified contractor who should pay attention to location of any in-floor structures or conduits. The locking pins on the bottom of the SuperPole FRS should be inspected regularly for damage.
• Effective:
  - The SuperPole FRS is placed into the installed floor receptacle and secured into the receptacle by turning the knob on top of the SuperPole FRS pole.
  - Floor receptacle installs flush with the finished floor surface. When not in use, the floor receptacle is sealed with a liquid-tight flush mount cap. The cap is removed by engaging two pins on the bottom of the pole into two holes in the cap, permitting the cap to be removed by turning it with the pole.
  - The loose cap will not be lost while the pole is in the receptacle, as it has a storage location in the top knob of the pole, covered with a decorative rubber grip.
• Installation:
  - Floor Receptacle: Installed in concrete, flush with floor surface to reduce trip hazards. When not in use, receptacle is sealed with a liquid tight cap.
  - Cap removal or storage: Receptacle cap is unscrewed using pins located on the bottom of the pole. Prevent loss by storing the cap inside the top of the pole.
  - Installation: Simply insert the pole into the receptacle and lock in place by turning the knob on top of the pole. Pole is secure and ready to use.