Winco Three Position Elite Comfort Recliner
Winco Three Position Elite Comfort Recliner

Winco Three Position Elite Comfort Recliner

Brand/Manufacturer: WINCO

Winco Three Position Elite Comfort Recliner offers superior comfort and durability. This recliner comes with smooth seamless upholstery that does not collect fluids and is easily cleaned. The leg rest extends automatically and three position can be attained by the user. It also has a built-in ergonomic headrest, adjustable elastic bands on the back frame that provide exceptional comfort, an elastic open seat base, and black 3" swivel locking casters.

Buy this product and earn 12.99 Reward Dollars.


  • Color
    View Color Swatches
  • Optional Accessories
  • Inside Delivery and Set Up
  • Total: $1550
    Total: $1299
Total: $1550
Total: $1299


  • Winco Three Position Elite Comfort Recliner has built-in ergonomic headrest
  • Elastic open seat base 
  • Fully upholstered arm side panels
  • Push handle on back for easy maneuverability
  • Optional non-porous blow molded fold down side tray available on both sides of the chair contains small spills
  • Note:
    - SilverTex is not recommend for applications involving frequent contact with bodily fluids where bleach is the preferred or required cleaner. Bleach is not advised for cleaning SilverTex
  • Click Here for User Manual

More Information

  • Back Installation:
    1. After checking your product for any shipping damage, chair needs to be positioned upright on level surface. Remove all packing material and hardware that was secured for shipping. Remove tape and plastic. If using scissors or knife, please be careful not to damage upholstery.
    2. Make sure footrest is in closed position and lock all casters before installing chair back.
    3. Remove the (2) Bow Tie Cotter Pins and the (2) Clevis Pins from the lower Back Frame Forks. Do not lose these parts.
    4. Using a second person to help; Position the Back Frame Forks over the Seat Frame and align Backframe Fork holes with holes in Seat Frame Rail.
    5. Use (1) one of the Clevis Pins (with tapered end) and insert it through the aligned holes on Back Frame Fork and Seat Rail Tube. Repeat for Opposite Side of Chair.
    6. Insert (2) two Bow Tie Cotter Pins, into the small holes on ends of the (2) two Clevis Pins you just installed.
    7. Remove Bow Tie Cotter Pin and Clevis Pin from the loose end of the Back Support Strut (Strut is attached to center of backframe).
    8. Align the holes on the loose end of the Back Support Strut with the holes in the Angle Brackets (on chair frame) and insert the Clevis Pin into these aligned holes and secure with the Bow Tie Cotter Pin.
  • Operation of the Chair:
    1. This recliner has three (3) positions: Upright, Semi-Recline, and Recline, which can be achieved by user or attendant.
    2. This chair is equipped with Total Lock casters. Stepping on the brake tab will lock the wheel and the swivel mechanism of the caster for added safety and security.
    3. To ensure proper operation of the reclining mechanism, lubricate all pivot points with a silicone type lubricant (or lubricant approved by your facility) at least twice yearly. Periodically recheck tightness of all screws and bolts.
  • Cleaning Instructions:
    - Remove grime, hair and body oils; Your furnishings should be cleaned with mild soap and water solution and a damp cloth on a regular basis (especially where skin and hair make contact with upholstery).
    - Avoid harsh detergents or chemicals that could damage the upholstery or finish of your recliner.
    - If the furnishing is disinfected with chemicals or bleach, it must be wiped off using only clean water on a damp cloth and then be allowed to air dry. Failure to rinse upholstery with clean water can result in a build-up of residues over time that can dry out the upholstery and cause changes to the look and feel of the upholstery and eventually can lead to cracking.


Weight97lb (44.00kg)
Height46" (116.84cm)
Width33.5" (85.09cm)
Seat Height18.5" (46.99cm)
Seat Width21" (53.34cm)
Seat Depth20" (50.80cm)
Seat Back Height32.5" (82.55cm)
Armrest Height26" (66.04cm)
Weight Capacity275lb (124.74kg)
Footprint Upright Length41" (104.14cm)
Footprint Recline Length63" (160.02cm)


1 Year warranty

Customer Reviews

Questions & Answers

Please enter your and your friends email address below.
Fields marked with * are compulsory

The selected product information has been successfully emailed to your friend.

Thank you for using