Winco Extra Large Padded Blood Drawing Chair

How to Assemble Winco Padded Blood Drawing Chair?

• Multiple size wrench included (or your own 5/16, 3/8" & 7/16" or adjustable wrenches)
• Phillips-head screwdriver
• Scissors or box cutter
• Powered tools not recommended

• Position Chair Frame in upright position. Check tightness of all installed screws, bolts and nuts in case they loosened during shipping.
• Align the screws on bottom of the seat assembly, with the seat support holes.
  - Note: Seat supports are angled to give the seat a very slight recline angle. The front of seat should be positioned toward the higher end of the strap. Be sure that all (4) seat screws go completely through the seat support straps on chair frame.
• Install (4) lock nuts to the screws on the seat assembly and completely tighten with 7/16" wrench.

• If the Arm assembly has not yet been installed, insert it into the Receiving Tube on Seat Frame Assembly.
• Then adjust the arm to the desired height and tighten the knob. Screw the Knob into the Slot. This will “capture” the arm and keep it from being able to be pulled out of the frame accidentally.

How to Clean Blood Drawing Chair?

• Remove grime, hair and body oils.
• Your furnishings should be cleaned with mild soap and water solution and a damp cloth on a regular basis (especially where skin and hair make contact with upholstery).
• Avoid harsh detergents that could damage the upholstery or finish of your recliner. If the furnishing is disinfected with bleach, it must be wiped off using only clean water on a damp cloth and then be allowed to air dry. Failure to rinse upholstery with clean water can result in a build-up of residues over time that can dry out the upholstery and cause changes to the look and feel of the upholstery and eventually can lead to cracking.

Winco Padded Blood Drawing Chair Specifications

Winco Warranty

• Limited One Year Product Warranty:
  - Winco Mfg., LLC warrants the complete product for one (1) year. At Winco Mfg., LLC sole discretion, it may repair or replace any components freight free that are found to be defective during the first year. Winco Mfg., LLC shall not be liable for any labor, or any other costs incurred as a result of or in conjunction with a warranty claim.     
• Limited Three Year Warranty:
  - Winco Mfg., LLC warrants recliner mechanisms, electrical components, vinyl panels and vinyl on upholstered parts [from cracking or delaminating] pressurized gas springs and casters, when new, for a period of three (3) years. At Winco Mfg., LLC sole discretion, it may repair or replace components found to be defective. Winco Mfg., LLC shall not be liable for any labor, shipping or any other costs incurred as a result of or in conjunction with a warranty claim. 
• Limited Lifetime Chair Frame Warranty:
  - Winco Mfg., LLC warrants steel and aluminum base frames for all products, when new, for the lifetime of the original purchaser. This limited warranty does not apply to paint/finish or any components attached to the frame such as; upholstery, foam, casters, mechanisms or related parts that are covered under above warranties. Winco Mfg., LLC shall not be liable for any labor, shipping or any other costs incurred as a result of or in conjunction with a warranty claim.  

Customer Reviews

Questions & Answers

Ask a Question

Enter your question below:

 

Security question 1+ 7 =   SubmitCancel

Enter your Answer below.

Security Question:1 + 7 =

	ItemQuestion ItemName - now
	Your question will show here once it will get approved.

	UserAnswer UserName - now Your Answer will show here once it will get approved.