Winco Privess Elite Designer 3 Panel Steel Frame Privacy Screen

How to Install Winco Privess Elite Privacy Screen?

• Scissors or box cutter
• 5/32 Allen Wrench (provided)
• Phillips screw driver (not provided)

• After checking your product for any shipping damage, remove all packing material and hardware that was secured for shipping. 
• Cut tape and/or plastic with scissors, being careful not to damage screen.

• Using a Phillips Screw Driver, Install (2) Screen Leg Reinforcement Tubes (#5) between Leg Frame Assemblies (#3)using 4-Phillips Head Screws (5A), one on each end, through (#3) into (#5). Leave screws on one Leg Frame Assemblies (#3) loose to allow assembly to be inserted into Wing/Mid Frame Assembly (#1A). 
• Insert both Leg Frame Assemblies (#3) into the bottom of the Wing/Mid Frame Assembly (#1A).Line up the holes in (#3) w/ the holes in (#1A). 
• Using the Allen Wrench provided screw in 1-Button Socket Screw (3D), per leg, through (#1A) and into (#3). Tighten 2-Phillips Head Screws (5A) that were left loose.

How to Clean Winco Privess Privacy Screen?

• Winco furnishings are built to provide durable reliable service when properly cared for. In general all of our products should be cleaned rinsed and allowed to air dry.
• It is important to note that disinfecting a product is not the same as cleaning the product.
• Disinfectants alone will not provide adequate cleaning, they do not have grease or oil cutting properties to remove grime or hair and skin oils.
• Over time, the appearance and feel and performance of your upholstery may diminish if not cleaned properly.

• Remove grime, hair and body oils; Your furnishings should be cleaned with mild soap & water solution and a damp cloth on a regular basis.
• Avoid harsh detergents or chemicals that could damage the finish of your product.
• If the furnishing is disinfected with chemicals or bleach, it must be wiped off using only clean water on a damp cloth and then be allowed to air dry.
• Failure to rinse with clean water can result in a build-up of residues over time that can damage your product.

• Never place screen on a cart, table, stand or other objects; Screen could fall and serious injury may occur.
• Never place screen near open flame or over a radiator or heat register.
• Never place screen in front of a door or exit sign; In case of emergency screen could block or hinder evacuation.
• Suffocation danger to children; Screen could block nose and mouth and prevent breathing. Vinyl screen is not a toy.
• Do not allow children to play with, or climb on screen; Screen could fall and serious injury may occur.
• Screen should always be positioned on level surface.
• Never stand or ride on screen legs; serious injury may occur.
• Do not use screen in or with any type of vehicle or trailer.
• Do not attach objects to screen frame; Screen can tip over and serious injury may occur.
• Remove from service; Any screen with broken or missing parts, torn vinyl, or other visible damage.
• Use only Winco authorized replacement parts.

Winco Privess Elite Privacy Screen Specifications

Winco Warranty

• Limited One Year Product Warranty:
  - Winco Mfg., LLC warrants the complete product for one (1) year. At Winco Mfg., LLC sole discretion, it may repair or replace any components freight free that are found to be defective during the first year. Winco Mfg., LLC shall not be liable for any labor, or any other costs incurred as a result of or in conjunction with a warranty claim. 
• Limited Three Year Warranty:
  - Winco Mfg., LLC warrants recliner mechanisms, electrical components, vinyl panels and vinyl on upholstered parts [ from cracking or delaminating] pressurized gas springs and casters, when new, for a period of three (3) years. At Winco Mfg., LLC sole discretion, it may repair or replace components found to be defective. Winco Mfg., LLC shall not be liable for any labor, shipping or any other costs incurred as a result of or in conjunction with a warranty claim. 
• Limited Lifetime Frame Warranty:
  - Winco Mfg., LLC warrants steel chair and aluminum base frame, when new, for the lifetime of the original purchaser. This limited warranty does not apply to paint/finish or any components attached to the frame such as; upholstery, foam, casters, mechanisms or related parts that are covered under above warranties. Winco Mfg., LLC shall not be liable for any labor, shipping or any other costs incurred as a result of or in conjunction with a warranty claim.

Customer Reviews

Questions & Answers

Ask a Question

Enter your question below:

 

Security question 3+ 4 =   SubmitCancel

Enter your Answer below.

Security Question:3 + 4 =

	ItemQuestion ItemName - now
	Your question will show here once it will get approved.

	UserAnswer UserName - now Your Answer will show here once it will get approved.