Under the Sea Switch Toy

Features

• Under the Sea Switch Toy requires 2 capability switches, 6D and 2AA batteries (not included)
• Size: 18"W x 30"L x 2¼"H
• Care of Unit: Empty the water from Under The Sea when not in use, and then wipe the inside with a paper towel or cloth, and let air dry. Under The Sea can be wiped clean with any household multi-purpose cleaner and disinfectant

More Information

Operation:

• To install the batteries, carefully turn the unit over to reveal the battery compartments. Next install 6C cell batteries into the two open compartments. Please note to follow proper (+) and (-) battery polarity. Installing the 2AA batteries requires the removal of the small Phillips Head screw from the small black battery case cover. Next remove the cover by sliding it off the case. Install 2AA batteries, and replace cover and screw.
• Fill the Under The Sea with water from the tap, up to the top of the starfish. Make sure the water hose is secure with the Velcro holding strap before actuating your switch.
• Plug your external capability switches (Not Included) into the two female 1/8" jacks located on the side of the unit. One switch will control music and lights when activated. Once the switch is released the music and lights will stop. The second switch controls the water. Activation of your switch will start the water flowing, releasing it will stop the water.