July 4th Sale! 10% Off | Code: HPJUINP
10% Off Women's Health and Rehab & Therapy, Code: ATBF10, Exclusions Apply
  866-316-0162 Toll-Free

PVI Aluminum OnTrac Ramp with Handrail

Authorized Retailer Badge

Shipping Charges Applicable

For Questions, Please Call...

Shipping Charges Applicable

For Questions, Please Call...


Item# Description Pkg reward$ Price Blank
Item #: XPS436
4ft L x 36"W
Item #: XPS536
5ft L x 36"W
Item #: XPS736
7ft L x 36"W
Item #: XPS636
6ft L x 36"W
Item #: XPS836
8ft L x 36"W

PVI Aluminum OnTrac Ramp with Handrail installs in minutes and used right away. It features a slip-resistant grooved aluminum surface which is better for traction making the wheelchair ramp extremely safe and reliable. It is durable and made of weather-resistant aluminum. The single bar handrail system comes standard in a powder-coated white finish.

PVI OnTrac Ramp Features

  • PVI Aluminum OnTrac Ramp with Handrail features 2” Curbing
  • All aluminum construction
  • Ramps available in lengths of 3', 4’, 5’, 6’, 7’, 8’, 9' & 10'
  • Little or no maintenance
  • Welded in 3', 4' or 5' sections and then spliced to create additional sizes
  • Maximum ramp capacity:
    • One axle: 425 lbs
    • Two axles: 850 lbs

What to buy with PVI OnTrac Wheelchair Access Ramp with Handrails

How to install the PVI OnTrac Wheelchair Ramp?

Tools required for assembling the PVI Ramp

  • Cordless Drill
  • #2 Phillips Bit
  • 5/32 Allen Wrench
  • Rachet
  • ½”Deep Well Socket
  • ½” Wrench
  • ¼” Masonry Bit
  • Tape Measure

Installing the handrail and legs of PVI Wheelchair Ramp

  1. Attach handrail starting at the bottom end of ramp run 5/16x1 carr. Bolt through ramp frame and post channel, fasten with a flat washer and selflock nut, leaving hardware loose enough to position handrail.
  2. Attach handrail at top end of ramp, run 5/16x1 carr. bolt through the ramp flange and handrail post fasten with 5/16 jam nut. Run a 5/16x1 carr. bolt through the frame of the ramp and the handrail channel and fasten with 5/16 jam nut.
  3. Attach legs attach ramp legs at top of ramp, place leg channel inside of the post channel with already installed carr. bolts coming through the slot in the leg channel, fasten with a washer and selflock nut, do not tighten all of the way until ramp height has been set.
  4. Attach legs attach support brackets at bottom of ramp, slip support bracket channel over the post channel run hex bolt through slotted holes of the support bracket and round holes of the handrail post with a washer on both sides fasten with selflock nut. Attach end loops attach end loops using handrail splice, slide handrail splice in the top & bottom handrail tubes with the set screw aligned with the notch in the handrail tube, slide end loop over the handrail splice and tighten set screw.
  5. Anchor ramp down, with ramp positioned in its final resting place, anchor ramp to ground using the supplied concrete screws on all four corners of ramp.
Note: ramp can also be anchored down using the support brackets, and legs hardware for doing so not included.

PVI Aluminum OnTrac Ramp Specifications

Code Weight
XPS336 49 lbs
XPS436 59 lbs
XPS536 69 lbs
XPS636 88 lbs
XPS736 98 lbs
XPS836 108 lbs
XPS936 117 lbs
XPS1036 127 lbs

PVI Aluminum OnTrac Ramp Warranty

Limited lifetime warranty

Customer Reviews


{{x.ShortDescription}} ...


Please enter your and your friends email address below.

Fields marked with * are compulsory

Your Name*
Your Email Address
Friend's Name*
Friend's Email Address
The selected product information along with Reward Dollar coupon code has been successfully emailed to you and your friend.

Thank you for using www.healthproductsforyou.com